Jump to content
SAU Community

Recommended Posts

Hi

i have 6 x 750cc injectors (continental/vdo) to suit rb20/25, they have only been used for less than 1500kms im guessing, i have changed my fuel system to suit E85 so had to change the injectors, i Paid around $780.00 for these. Thsy have been modified to fit into RB25 but im not sure if they will still fit in rb20 without modifying again. Im chasing around $450.00. Check link below to see exact type. :D

http://www.injectorsonline.com/indivprod.php?cid=74&scid=12

cheers

Danny

Edited by Deeboflange
Link to comment
https://www.sau.com.au/forums/topic/356981-750cc-injectors-to-suit-rb2025/
Share on other sites

<br />Hey man, <br />How much would postage be to Melbourne 3049<br /><br />Thanks mate<br />
<br /><br /><br />

hey mate im guessing only $8-10

cheers

<br /><br /><br /><br /><br /><br />ill find out off mechanic and get back to you!!<br />
<br /><br /><br />

He changed the fuel rail so they fit the RB25 otherwise they bolted straight in the the RB20.

hope this helps.

Danny

last offer!! $300.00 any takers?? These are 11mm top feed Injectors. suits lots of models, just check the link in above post.

Edited by Deeboflange

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...