Camber Corection

[08r3308]

atm car is 325mm centre to guard at rear and i would like to fix camber up a little, was thinking of using KTA128 from whiteline or ebay has Neotech ones for half price and they look decent too.

anyone used neotech or whiteline ? is adjust ability same? road noise between the two?

ps. i do not want to use bushes

[JadGTST33]

I have an R33 GTST too, and have purchased some second hand adjustable rear camber arms from here on SAU. Had them in for about 6+ months now.

The only thing I was critical about was making sure not to touch China copies (which are often ebay jobs).

I just personally dont trust a lot of parets that come out of China.

Also, depending on ride height and wheel/tyre size, you might need to get your wheel arches rolled incase the tyre faults against the guard once the camber is straight.

I have the top of my rear wheel arch sitting a bee's dick above the top of the tyre (235/45 on 17x9 +35), and can nicely fit a finger between them.

Although keep in mind that gap will change once the right foot is hard into it!

FYI - my rear camber was about -2.5 degrees, and is now around -0.5.

[08r3308]

i have had my guards rolled , so once i correct it should be fine

btw how do you find your camber arms , same like stock no additional noise?

[JadGTST33]

Zero difference in road noice. I guess technically there is more tyre contacting the road, so more noice... but if you can hear it, then I reckon you must have supersonic ear drums! haha.

I get a little bit of squeek, but that's from my lower suspension mount (HKS Coilovers), not the camber arm.