Jump to content
SAU Community

Recommended Posts

Hi all,

Starting a new ad with what is left list as follows.

Aftermarket 3" front dump pipe with cat in pipe - $120

post-72691-0-75090100-1293834697_thumb.jpg

Standard RB25 turbochargers x2 $250 ea

post-72691-0-48827000-1293836040_thumb.jpg

Front and rear calipers $250 for the fronts $120 for the rears

post-72691-0-56110500-1293835572_thumb.jpg

Pillar trims $10 each

post-72691-0-41128200-1293834909_thumb.jpg

Diff including upper and lower control arms and cradle $280

post-72691-0-27082900-1293834812_thumb.jpg

Door trims $20 each or $30 for the pair

Full set of seatbelts $20 ea

Misc other dash and interior trims from $5 each

Pm or reply here or Email me

Link to comment
https://www.sau.com.au/forums/topic/359117-r33-miscellaneous-leftover-parts/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Hi mate, do you have the front inner mud guards (the plastic thing that covers the front wheel arche to the inner front bar?

If so, please PM me with price. I'll take it.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...