Jump to content
SAU Community

Recommended Posts

Hey guys parting out my 33 slowly so here goes a few parts

33 FMIC kit, kit is 2 months old purchased from justjap, includes HPI piping kit with all original scilicone couplers ( x5 ) & clamps and a brand new cooling pro bar and plate 600x300x75 core, in the box from justjap. ( purchased the core im selling with the kit for another car but due to flip mounting my cooler against radiator i rather use a tube and fin design cooler so keeping the HPI core ). Intercooler piping fits very well and requires minimal cutting of clutch fan blades to fit

post-77457-0-64088100-1301458713_thumb.jpg

post-77457-0-10294100-1301458665_thumb.jpg

$300!

tomei brake master cylinder stopper

post-77457-0-08233500-1301460907_thumb.jpg

post-77457-0-61146100-1301460932_thumb.jpg

$60

RB25 exhaust manifold heat shield

post-77457-0-22617300-1301458617_thumb.jpg

$30

RB25 ( prob suits rb20 aswell ) turbo heatshield and bracket

post-77457-0-04138100-1301458526_thumb.jpg

$40

Oil catch can with drain plug.

post-77457-0-45499900-1301458473_thumb.jpg

$50

oem r33 radiator, good condition, very minimal bent fins

post-77457-0-77805200-1301458437_thumb.jpg

$50

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

post-77457-0-40233100-1301458823_thumb.jpg

$40

Oem front and dump pipe ( only dump pictured, front pipe is just standard aswell )

post-77457-0-56151900-1301458789_thumb.jpg

$40

oem green label r33 AFM. Good working order, mesh still intact front and back

post-77457-0-07892800-1301458862_thumb.jpg

$50

HKS filter with element all intact and good condition, includes coupler, 2 clamps and attatchment piece to join it to your AFM.

^ PIC ABOVE

$50

Or get the complete intake ( scilicone pipe, AFM + HKS pod ) for $110

Contact by Pm or 0416 129 811.

Nik

Edited by nik.

Scilicone intake pipe suit R33 ( possibly fit others, not 100% sure? ) perfect condition, no tears or cracks with inlets for bov return / breather port.

$SOLD

turbosmart 2stange boost controller with missle switch

$50

Also selling complete rear interior (including good condition seats, plastics, seatbelts, all bolts, buckles, washers, handles etc.)

$110

Complete r33 aircon, including cendensor, compressor, all AC lines, the little can ( everything from the engine bay)

$80

Front strut brace suit 33

$50

Rear strut brace suit 33

$50

monkey brace suit all car models

$80

Or get all 3, struts & monkey bar for $140!!

Edited by nik.

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

Hey mate I'll take the front pipe, dump pipe and front and rear strut brace if still for sale. Cheers let me know

All still for sale man, PM sent!

  • 4 weeks later...

is the boost controller still for sale? and also the monkey bar?(what exactly is it?)

cheers

  • 2 weeks later...
  • 3 weeks later...

sorry havnt had an internet connection for a while. cooler still for sale, pm sent. cheers luke

boost controller is also still for sale, lhs headlight has also sold.

tomei BMC still here aswell. had 5 people tell me they will buy it ! so far... $60

RHS headlight, good condition, no cracks. top grill mount tab broken. $60.

Edited by nik.

lots of tyre kickers and lots of parts left!

complete standard rb25det package minus turbo from a s1 r33.

purchased and installed by justjap on 11/12/09 (1 year 6 months ago) and has since put 31,000km on the engine. I also have the purchase and install receipt from justjap.

includes throttle body, intake manifold, injectors, rail, reg, complete running motor with accessories; p/s, alternator, exhaust manifold, engine mounts, coilpacks and ignitor, loom and standard ECU. rb25 gearbox with no crunches, shifts nice and smooth, no issues. includes a short shifter, box mount, clutch slave cylinder, heavy duty clutch of some sort, will be inspected when engine is removed.

Engine runs fine with no issues, blows no smoke.

$2400 with everything

$1200 without gearbox

if any more info is required, can contact by pm or sms 0416 129 811.

located in wollongong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...