Jump to content
SAU Community

What Spec Fuel System

MrGT-R
 Share

Recommended Posts

MrGT-R Rookie

MrGT-R

Posted
Posted

Hi all sorry if this is in ghe wrong section

i am in the process of up'ing the power on my R33 GTR aiming for 600bhp at the fly, (rb26 standard internalls and cams)

things i am undecided on

1. 2530's (or -5's) or single precision 6765, both good for over 600hp just dont know if i can be bothered with low mount twins as they are a pain in the arse to work on, but on the other hand i dont want to build a lag monster and never be on boost hence not sure on the single 6765 yet.

2. whats atcually needed to get 600 (ie fuel system) a lot of different opinions on gtroc.

i was thinking either a tomie in tank or twin 044's in tank with 720cc injectors and a fuel reg. and a dual entry fuel rail.

will this be enough? i dont really want a swirl pot in the boot i need what little space there is.

thoughts/comments appreciated.

Tib

Link to comment
https://www.sau.com.au/forums/topic/360471-what-spec-fuel-system/
Share on other sites
MrGT-R Rookie

MrGT-R

Posted
  • Author
Posted

thats cool, but i am looking to build rather than buy a fuel system already done.

was just asking what people consider essential fueling wise for around the 600hp mark.

already decided on 720cc injectors its the fuel rail and pumps i'm unsure about.

tib

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      ZF 6HP26 to RB30 block

      By GTSBoy · Posted

      Wow ELVIS. You have an....interesting approach to conversation. Did you not notice that I wasn't talking to you?
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • joshuaho96
      ZF 6HP26 to RB30 block

      By joshuaho96 · Posted

      Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
×
×
  • Create New...