Jump to content
SAU Community

Recommended Posts

Hey all - quick question in regards to suspension

If this has been covered, please show me the way :)

My front left strut has got a decent squeak whenever it hits any sort of bump, or rolls off the drive way, over speed bumps etc etc.

Ive stuck me head down close to the wheel and got someone to push down on the car and the noise is diffenatly coming from the top of the strut. would it be a bush of some sort that is worn/split?

Im taking it to pedders for that $14 check (but hoping they won't find too much thats wrong with it), just thought i'd see if you guys had any recommendations first.

Cheers

Ben

Thanks for the info

yeah, can't really complain, the suspension has lasted 10 or so years of australian roads hahaha

so might be worth getting all bushes replaced you reckon? or just control arms upper and lower for now?

Edited by BstewyR33

if its coming from the top of the strut its most likely upper control arm, if the bushes are worn it will sometimes cause the upper control arm to rub against the chassis and hence the noise- rubber bushes don't get noisy

then again chances are your 10 year old shocks are probably shot, so might be worth looking at upgrading the suspension while you're at it

i replaced mine with urethane ones, only Superpro makes them, they were noisy for a good couple of monthes and the noise just left afterwards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, wondering if the HKS bar and water reservoir still available? Thanks 
    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
×
×
  • Create New...