Jump to content
SAU Community

Te37 Rims Or Similar

rdirty3

By rdirty3,
in Exterior & Interior Styling

 Share

Recommended Posts

rdirty3 Contributor

rdirty3

Posted
Posted (edited)

Hi All,

Im relativity new at looking into purchasing rims i was chasing after second hand 18" Black TE37 rims and what type of prices id looking at

post-75167-0-53207200-1303479495_thumb.jpg

Or is there an alternative such as a cheaper copy version of the 18" TE37???

or some that look similar that are around $500-1$500

Any help would be great!

Cheers!

Edited by rdirty3
Link to comment
https://www.sau.com.au/forums/topic/361831-te37-rims-or-similar/
Share on other sites
rdirty3 Contributor

rdirty3

Posted
  • Author
Posted

Thanks mate,

Do you have a rough idea of what the TE37 go for second these days ive seen a few go for 2k second hand?

the same qution for the Varrstoen ES 2.2.2? as look like a good option. i would be looing at getting the Varrstoen ES 2.2.2 second hand as im on a bit of budget and all.

rdirty3 Contributor

rdirty3

Posted
  • Author
Posted

Depends entirely on offsets/width.

As a rough guide, 18x9.5 +12 go for around 3k.

My price range is around $1000-$1500 im looking for a rim that looks similar that is in price range(probably second hand has i doubt id find anything that reflects my price range).

Cheers!

rdirty3 Contributor

rdirty3

Posted
  • Author
Posted (edited)

talk to wei at vision r if your in perth

Thanks mate they look to be the way to. if i cant find a decent second hand set.

Does anyone know someone selling them second hand 18"" in Gloss black in Perth WA?

Cheers

Edited by rdirty3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...