Jump to content
SAU Community

Recommended Posts

I have currently in my r32 skyline these seats and want to sell them. or i will swap for good condition r32 gtr seats.

1x genuine SPG recaro bucket seat with rail suit r32,r33, 180,silvia, s13, 200sx, lurel, cefiro.

1x replica recaro SPG bucket seat with rail; suit r32,r33, 180,silvia, s13, 200sx, lurel, cefiro.

genuine was brought through j-imports

the replica was brought from mad automotive

the rails were brought from mad automotive also. both low and fully adjustable.

location is hoppers crossing victoria.

pickup only.can deliver in the west .

Price is = $1500 for both seats and both rails

more pictures can be provided but you get the picture.

the copy looks exactly the same.you can only tell by the padded corners .

very comfy even for a daily driver.

copy seat below

169769_159466177439086_100001271133118_335611_7181633_o.jpg

genuine spg seat below

2011-02-06122448.jpg

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Hmm yeah I guess if you weigh over 90 this seat will be a bit uncomfortable...I find these eats really comfortable. snug you in good.I guess come have a try for yourself then decide

ok genuine could be sold so only selling the copy seat it can be used for drivers or passenger has side rails to suit any other rail or can come with full passenger rails to suit r32,r33, 180,silvia, s13, 200sx, lurel, cefiro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...