Jump to content
SAU Community

Recommended Posts

I have told my insurance company everything that isnt stock, that way they have no way of trying to stop paying me in the event of a claim..

Why bother telling em only half or so of the things if they are gonna class it as void anyway...

best to declare everything generally... firstly to make sure its covered when an incident occurs and secondly and more importantly to make sure they cant use it as an escuse to not pay up. Most insurance companies will want to know everything, some may not need to know. But i guess thats where a phone call to your particular insurance company will answer that question. Depending on who your with though.. once you get to a certain level of mods they may not want to insure you anymore... or at least not for a reasonable price any longer, this is where somewhere like just car is helpful.

Do I have to tell the insurance company that I have made these modifications?

That depends on whether you want to be covered in case of an accident.

As per the policy the insurer may void your claim if you have unlisted mods. Especially those that could cause you to have a higher risk of accident, either because of mechanical failure or making the car more powerful (and theoretically harder to handle or more likely to be driving faster). Or make your car more of a theft target since thieves will want those parts. Which is all of them, really.

At any rate, if you don't declare accessories (i.e. non-mechanical stuff) then even if you get paid out they won't factor their value into the payout figure. Because, as far as they're concerned, you never had them.

This is an insurance question,

with the modifications of the following

1. Pod FIlters

2. Z-tube

3. Grounding Kit

4. Plenum Spacers

5. Strut brace

Do I have to tell the insurance company that I have made these modifications?

You should, if you want to claim the modification costs back when the worst possible thing happen to your car. I am not sure if different insurers have different ways to insuring the modified cars.

I am with HBF. When I called them up 2 years ago about insuring my bodykit, etc, they said I can insure up to about AU$8500 (Which is about 25% of the total agreed insured value of my car.).

So looks like I will be changing the insurer when I past AU$8500 mark in modifications, if my policy stays unchange.

Edited by VNS 24

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...