Jump to content
SAU Community

Damaged 180Sx! Ca18Det 5 Speed!

Dr Tuning
 Share

Recommended Posts

Dr Tuning Collaborator

Dr Tuning

Posted
Posted

Hey guys, am selling a 180 for wreck or re-register...

The car was involved in a front ender about 2 yrs ago, i bought it off a mate as i was going to use it as spares for my S13 at the time though this idea has fallin through & have now decided to sell it..! Its great for parts as all the glass, doors & rear are fine & the engine & box are perfect... The front end is not the best so you would have to either cut the drivers section out of the strut tower & replace it with a 'Half cut' as this would probably be the cheapest & best option though it comes with a new drivers Gaurd & Bonnet to help on that behalf... The Radiator support is pretty fudged as well so you would have to replace that too.. It wasn't a hard enough hit to damage the motor or any of its surrounds though the chassis is also damaged at the very front but not anywhere else...

The car drives fine & you can come & inspect it pretty much anytime that suits you as it still starts & runs, sounds awesome but if you do buy it complete you will have to get it towed... It was never classified as a write off as the smash was completely private so all it needs is a Blue Slip ( RWC ) to re-register... I would prefer to wreck it as most parts are still in good condition but it depends on the buyer i guess! Anyway, prices are listed bellow & am pretty firm on the motor & box!!

CA18DET & 5 SPEED, complete with Harness, ECU & S14 T28 - $1500 / Great complete package for a non turbo S13, can hear running as well.

Viscous LSD to suit, complete with drive shafts!! Great to go with the Engine & Box if used in a non turbo S13 - $200

Bar, Gaurd, Bonnet, Doors, Quarters, Windows & Interior - Ask for prices as i would like to sell the motor & box first or keep it complete for now incase anyone wants it to repair!!

Anything else, like the Pedal box & such just ask... Cheers!!

If you would like the whole car to perhaps use it as a track slider or to re-register it then the best i can do is $2200 as its worth much more it parts alone... Check out the pics & tell me what you think anyways, thanks guys its great if you have an Auto 180 & want a manual conversion!! Cheers again...

Matt

Link to comment
https://www.sau.com.au/forums/topic/362263-damaged-180sx-ca18det-5-speed/
Share on other sites
Dr Tuning Collaborator

Dr Tuning

Posted
  • Author
Posted

Oh, the car is located in Blacktown NSW 2148... And here are some pics lol.

180engine.th.jpg

Uploaded with ImageShack.us

180t28.th.jpg

Uploaded with ImageShack.us

180front.th.jpg

Uploaded with ImageShack.us

180side.th.jpg

Uploaded with ImageShack.us

180side2.th.jpg

Uploaded with ImageShack.us

The wheels in the last pic dont come with the car & arnt for sale either, cheers guys!!

Dr Tuning Collaborator

Dr Tuning

Posted
  • Author
Posted

Here are some more pics of the damage...

180front2.th.jpg

Uploaded with ImageShack.us

180corner.th.jpg

Uploaded with ImageShack.us

180corner2.th.jpg

Uploaded with ImageShack.us

The strut tower itself is actually fine on both sides, its just a bit fudged from that to the support on both sides & the guy i bought it off attempted to fix it though i would have just cut the section i needed from a Half Cut & welded it on with the support.!

I also noticed the hatch is in need of some repairs as well, it had a Spoiler on it at some stage of its life & looks like it was 'Bogged' over so that has started to crack around the Bog & the Paint job overall is pretty dam average with fading on the roof & pressure pack black on parts of the Quarters...

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...