Jump to content
SAU Community

Auto Electrician Services , I Can Come To You Or You Can Come To Me ! Trade Qualified


Recommended Posts

HI GUYS,

my name is dan and i am offering you a lower hourly rate than any other auto elect, my work is neat and tidy and the "job gets done right the fist time."

i can come to you or you can come to me i cover a wide range of auto electrics the only thing i cant do is air con cause i dont have gear on me at this stage.

So if there 's something you need doing or fixing just give me a bell and we can organise a time and place to do the job

i also do car stereos, uhfs, ph kits, elect boost controllers and much more

please feel free to call anytime

0411373366

maybe you were advertising? you can't advertise here or else you'll get a smack.

until security came along n said theres no advertisin here n so he kicked, pushed, kicked, pushed, kicked, pushed, COASTTTTTtttt...

where to advertise ?? i was doing people a favour offering my services (easy to get a hold of and fit you in quickly and get the job done)...............

thats what i said about my car detailing! hahaha no but seriously folks...

contact the admin / moderation staff - they'll know what happened to it, not us :)

there is to be no advertising unless you're a paid advertiser / site sponsor as far as i know - but again...

just PM either dan the man, Ashy Larry, or Navin...

Yeah its a little silly, but thats the rules...

Its like shitttttttt my car is broken!! No god damn lights on it... Better find a good well priced sparky asap!!

Looks on sau - none.. God damnit.

-Proceeds to get raped by local sparky mob-

  • 3 weeks later...

hey mate, ive just bought a nismo 300km/h speedo for my 34 gtt, but im having problems with it. its plug and play, has the same 3 plugs from the standard and should work no worries. but when i plug it in, all i get is the seat belt and engine light illuminated even when the key is not turned on. the dials do not work at all, no speed or revs. have you heard of anything like this before mate? is there much that can go wrong with them, or am i better off sending back to supplier?

thanks champ

HI GUYS,

my name is dan and i am offering you a lower hourly rate than any other auto elect, my work is neat and tidy and the "job gets done right the fist time."

i can come to you or you can come to me i cover a wide range of auto electrics the only thing i cant do is air con cause i dont have gear on me at this stage.

So if there 's something you need doing or fixing just give me a bell and we can organise a time and place to do the job

i also do car stereos, uhfs, ph kits, elect boost controllers and much more

please feel free to call anytime

0411373366

Perfect timing mate. Might have a stereo job for ya. I'll be in touch. :thumbsup:

\

hi just wondering how much you would charge to install my apexi turbo timer and boost gauge in my r33 gtst skyline?, im taking in my car to an auto electrician tomorow so just wondering if you can give me a good deal.

hey mate, nah its a GTT dash, 300km/h. the GTR is the 320km/h. this one is plug and play, well meant to be!

Well there goes my wonderful idea! Maybe check that there is not a dry joint or something similar. If your not sure how i can give you a hand just let me know.

The dash problem maybee wires in diff location but if it's meant to be for 34 gtt well it should be the right one. Have you blown. A fuse or does original one work fine give us a call

0411373366

  • 3 weeks later...
  • 6 years later...

Just a quick update guys I am still doing work I and around Perth visit my Facebook page give me a shout if you need anything.

https://www.facebook.com/verrelliautoelectrical/



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...