Jump to content
SAU Community

Auto Electrician Services , I Can Come To You Or You Can Come To Me ! Trade Qualified


Recommended Posts

HI GUYS,

my name is dan and i am offering you a lower hourly rate than any other auto elect, my work is neat and tidy and the "job gets done right the fist time."

i can come to you or you can come to me i cover a wide range of auto electrics the only thing i cant do is air con cause i dont have gear on me at this stage.

So if there 's something you need doing or fixing just give me a bell and we can organise a time and place to do the job

i also do car stereos, uhfs, ph kits, elect boost controllers and much more

please feel free to call anytime

0411373366

maybe you were advertising? you can't advertise here or else you'll get a smack.

until security came along n said theres no advertisin here n so he kicked, pushed, kicked, pushed, kicked, pushed, COASTTTTTtttt...

where to advertise ?? i was doing people a favour offering my services (easy to get a hold of and fit you in quickly and get the job done)...............

thats what i said about my car detailing! hahaha no but seriously folks...

contact the admin / moderation staff - they'll know what happened to it, not us :)

there is to be no advertising unless you're a paid advertiser / site sponsor as far as i know - but again...

just PM either dan the man, Ashy Larry, or Navin...

Yeah its a little silly, but thats the rules...

Its like shitttttttt my car is broken!! No god damn lights on it... Better find a good well priced sparky asap!!

Looks on sau - none.. God damnit.

-Proceeds to get raped by local sparky mob-

  • 3 weeks later...

hey mate, ive just bought a nismo 300km/h speedo for my 34 gtt, but im having problems with it. its plug and play, has the same 3 plugs from the standard and should work no worries. but when i plug it in, all i get is the seat belt and engine light illuminated even when the key is not turned on. the dials do not work at all, no speed or revs. have you heard of anything like this before mate? is there much that can go wrong with them, or am i better off sending back to supplier?

thanks champ

HI GUYS,

my name is dan and i am offering you a lower hourly rate than any other auto elect, my work is neat and tidy and the "job gets done right the fist time."

i can come to you or you can come to me i cover a wide range of auto electrics the only thing i cant do is air con cause i dont have gear on me at this stage.

So if there 's something you need doing or fixing just give me a bell and we can organise a time and place to do the job

i also do car stereos, uhfs, ph kits, elect boost controllers and much more

please feel free to call anytime

0411373366

Perfect timing mate. Might have a stereo job for ya. I'll be in touch. :thumbsup:

\

hi just wondering how much you would charge to install my apexi turbo timer and boost gauge in my r33 gtst skyline?, im taking in my car to an auto electrician tomorow so just wondering if you can give me a good deal.

hey mate, nah its a GTT dash, 300km/h. the GTR is the 320km/h. this one is plug and play, well meant to be!

Well there goes my wonderful idea! Maybe check that there is not a dry joint or something similar. If your not sure how i can give you a hand just let me know.

The dash problem maybee wires in diff location but if it's meant to be for 34 gtt well it should be the right one. Have you blown. A fuse or does original one work fine give us a call

0411373366

  • 3 weeks later...
  • 6 years later...

Just a quick update guys I am still doing work I and around Perth visit my Facebook page give me a shout if you need anything.

https://www.facebook.com/verrelliautoelectrical/



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...