Jump to content
SAU Community

Recommended Posts

Hi guys. I have a 2004 350GT Premium. I'm not too happy with the BOSE sound system so I decided that I'm gonna change the setup.

-New Head unit.

-New Speakers

-Amp

-Subwoofer

I've had a look around the forum but I can't really find anyone who has done a complete audio revamp of their V.

Can anyone recommend someone or a place in Sydney that will be able to do the job?

Is it better to replace the control panel to accommodate the head unit? or should I just

place it inside the glove box?

any suggestions would be great.

Link to comment
https://www.sau.com.au/forums/topic/365036-not-satisfied-with-the-bose/
Share on other sites

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Edited by mosoto

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

I wasn't satisfied with it either :)

A pillars

post-59606-0-21627300-1306163779_thumb.jpg

head unit (when a work in progress)

post-59606-0-78209300-1306164455_thumb.jpg

I purchased the separate AC controls from Infinity USA and fitted them to the stock fascia which has been modified for the single DIN Head Unit.

Boot

post-59606-0-74595500-1306163901_thumb.jpg

post-59606-0-07938700-1306163935_thumb.jpg

that there is $3.5k worth of installation (labour & materials only

very nice.. though i wont think i'll be spending that much.. i'll be spending more on the range of $1.5K-2K

just started shopping around ebay for the dash conversion. strathfield car radios is selling the dash conversion for $500 :|

massive rip off.

Great setup there Mark.

Would I be right in saying those A pillar splits are something from the top-shelf brands? - Looks like Morel to me but could be wrong. Do you mind walking us through your setup? Or if you've detailed it in another post could you kindly link us up?

Cheers

Thanks Tarun. The system is as follows:

Speakers - Hybrid Audio Technology or HAT. 7.1" midbass, 3" midrange and 1" tweeter.

Amps - Zed audio Leviathan 6x150w one for left side one for right.

Head Unit is the Pioneer P99.

Subs are Image Dynamics IDQ12's

All speaker cabling is Canare.

Signal cable is 8 channel Mogami snake cable w/- stinger bullit ends.

I've got a 160GB hardrive in the centre console connected to the HU via USB so I rarely use the CD.

A link to my build thread on MEA is here. Sorry, it's a members only section so the link will be no good unless you join MEA. :) but well worth it if you are into car audio

Edited by mosoto

Mark i would sugest checking out ebay and getting a din replacement from ebays, you can get em for like 100 bucks for just the face, also i have a non prem v 2003 are the speakers in front and rear the same size? im thinking i might get some pioneers installerd.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...