Jump to content
SAU Community

Recommended Posts

Hey, I just got a few things for sale to help fund my next round of mods :thumbsup:

I'm located in S.E VIC so pick-up is fine and I'm also happy to meet buyers somewhere. I'm also more than happy to post so hit me up for postage costs for the parts you're interested in :)

I'm not at home at the moment but can/will post pics up or happy to send photos to emails and mobiles.

1:

- RB26 head out of a R33 GTR

- Head is in excellent condition, a little dirty but an acid bath would have it gleaming and brand new again

- Dismantled from the block which had 65,xxx kms

- Inlet side has been port matched, light polish and burrs removed

- Valve springs, retainers, head studs etc. all included

- No cams or valves

- Polished Rocker covers <----------------- I'm actually pretty keen on keeping these but can adjust price if you don't want them

This is perfect for anyone who needs a new head for their RB26 or to store for a rainy day or to even keep in the garage to build up. No cams also means that you can purchase any cam size you want to suit your application.

Would also be perfect for anyone who wants to do a RB30/26 conversion as RB30 blocks can be had for around $150 (half the time I see them get given away for a 6-pack of Jimmys lol)

I was planning on keeping this to slowly build up in the garage to go with my RB30 bottom-end, but shift in circumstances have forced me to sell and stick with my RB25 instead :(

Price: $600 ONO

2:

- RB25 Pink label AFM

- Excellent condition, mesh still intact

- Works perfectly and was only removed due to upgrade to Z32

- Every air filter clean I would give the AFM hot-wire a spray with Electrical Contact Cleaner so it's definetley been well looked after :P

- I believe these can be used on RB26s as an upgrade??

Price: $120 ONO

3:

- 370cc RB25 purple top injectors

- Worked perfectly fine and was only removed to fit 480cc injectors

- Can arrange to have them flow-tested and cleaned if you want (I think it's around $200 or so when I got my 480cc cleaned and tested)

Price: $120 ONO

4:

- Standard R33 GTS-t fuel pump

- Working perfectly and only removed to fit a Bosch 040

- Comes with the little sock attachment on the end (AWESOME!!!)

- Good for the RB25DE non-turbo fellas looking to get a cheap fuel pump capable of some near stock boost level

- Also good for the RB25DET turbo fellas who need a good fuel pump to help narrow down fuel issues (got a car that runs lean? Not sure if your fuel pump playing up? THEN BUY THIS AND GET IT OUTTA MY FACE AND KNOW FOR SURE IF IT'S YOUR FUEL PUMP THAT'S DYING!! :thumbsup:)

Price: $50 ONO

5:

- Genuine HKS mushroom air pod filter

- Excellent condition

- No foam chunks missing, all intact

- It's green

- Will also chuck in a pipe so that you can fit it onto your AFM. If I can find a silicon joiner too, then I'll chuck that in as well

Now you can justify having HKS stickers on your car because if you buy this filter, you will ACTUALLY have HKS parts on your car. JDM YO!! :banana:

Price: $100 ONO

I also have a bench press/gym set for sale but it's in the non-car related section. Check it out and get buff :thumbsup:

I'm looking for these things in particular and I'm sure we can come to an agreement if you want to trade parts for parts or with cash adjustment:

- Plazmaman RB25 intake plenum

- Power FC EL hand controller (the new version that works with all models of PFC)

- If I need anything else, I'll add it to the list. Or just throw me offers of what you got, but do prefer cash or the above two though.

PM me, reply here or contact me on 0402 732 860.

Oh, and don't be afraid to throw me some offers :)

Cheerrs.

Link to comment
https://www.sau.com.au/forums/topic/365038-rb26-head-rb25-afm-hks-pod-filter/
Share on other sites

hey mate pod filter fit r32 gts-t?

Hey mate, no reason why it shouldn't. The only thing is it doesn't come with a pod filter adaptor for your AFM but they're like $25 or so from Autobarn I believe.

I can have a look around to see if I have a spare one laying around and if I did, it would be for a RB25 but I'm more than happy to chuck it in for a couple of extra bucks so you can try for yourself to see if it fits :)

shot gun head....

Got you first in line bud :thumbsup:

All PMs have also been replied to :D

Edited by turbodragon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...