Jump to content
SAU Community

Recommended Posts

Item Summary: 1988 NISSAN CEFIRO A31, SR20DET. Nice family car.

Location: QLD: Brisbane

Postcode:

Odometre: 138,000 kilometres

Asking Price: $12,000

Condition: Used

Reason for Selling: meow meow meow

Delivery Methods: PickUp

Contact Info: GEETEEARR AT LIVE DOT COM or PM for more details and/or number.

Extra Information:

So now I'm going to attempt to list the junk this car has. I'll edited later if I miss anything.

Engine:SR20DET

Garrett GT2876R .64 rear

Tial 38mm Wastegate

TRUST copy bleed valve.

SARD 550cc injectors

Tomei Fuel Pressure Regulator with liquid filled pressure gauge.

TRUST Filter with lobster weld intake.

Z32 AFM

Custom exhaust manifold

GKtech Rocker Arm Stoppers

Ed Hardy reservoir socks

BEE*R 3" exhaust. Currently has Twin 3inch "SRP19" pipes. CAT back BEE*R system will go with sale.

GReddy Intercooler "GTR Style"

Yoshio Factory 50mm Radiator

Grex Oil cooler + filter relocation kit. Braided lines and speed flow fittings.

Secondary Oil pressure and Water temp sensors for respective gauges.

Apexi PowerFC with Hand Controller

Battery Kill Switch

JJR Engine Damper

SR20DET Gearbox recently built with brand new Cluster and 3rd gear. All internals have been strengthen via Cyro treatment. ( http://www.nitrofreeze.com/cryogenic_treat...otorsports.html and http://www.nwcryo.co...orts_gears.html ) for more info.

Short Shifter.

NISMO 3 puck clutch, sprung center. Rebuilt same time as gearbox.

NPC Billet Lightened Flywheel.

Gearbox, clutch and flywheel have about 600kms on them.

Body and Suspension:

URAS kit, like Cefiro's come in anything else =\

6 point CUSCO roll cage. Only half cage is currently fitted. Front half will go with sale of car.

Sway bar: Front Whiteline 27mm Rear GAB GTR 34mm

JIC front STRUT Brace

D2 Coilovers; 8kg front 10kg rear (something like that, it's really stiff and purple!) with front Camber plates.

JJR Adjustable Front Castor Rod

TEIN strengthened Tie Rod with built in steering lock spacers for extra lock.

Adjustable Tie Rod ends with pillow ball joints.

R32 GTR Rear Cradle.

Alloy Cradle Bushes

NISMO 2 way DIFFERENTIAL LOL (4.3 or 4.7 FD. First gear doesn't really exist)

CUSCO Rear Camber Arms

CUSCO Rear Toe Arms

All bushings are Nolathane. I like red things.

Brakes and wheels:

R32 Calipers Front and rear

R32 Handbrake setup

R32 Master Cylinder

Slotted Rotors front and rear

NISMO R-Tune Brake Pads

Braided Brake lines front and rear.

5 STUD conversion.

Car will be sold with a set of R32 GTR wheels. Wheels pictured are optional.

Wheels that will also be sold with car are a full set (4) of near new wheels (looks like something from the early 90's, David Hasselholf styles) that measure in at 16x8 +32.

A pair of glow in the dark R32 GTST wheels.

A pair of SSR meshies 16x9 +42 or something silly.

Optional wheels are;

BBS LM's 17x9 +20

Work Rezax 17x9 +8

SSR Longchamp XR4Z in fluro orange 17x8 +20 (+25mm bolt on spacers supplied to hard park these babies)

R33 GTR wheels Chrome dipped 17x9 +30

Interior junk:

Autogauge "Monster" tacho with shift light

Omori boost gauge

JDM cup and cigarettes holder

PowerFC handcontroller

SUPER AWESOME White wooden wheel with SMILEY FACE! (best purchase EVA)

Leather NISMO gearknob.

Water Temp, Oil Temp and Oil Pressure gauges.

R32 GTR Seats

Fire extinguisher mounted to roll cage. (pro job)

Stripped rear half.

SONY MP3 headunit

6" Pioneer splits.

6.5" Pioneer rear speakers.

It's MOD platted for the following; Engine, Brakes, Roll Cage and 2 seater. Also currently registered as a 2 seater.

Car was tuned @ Hi Power Racing by Terry.

197rwkw @ 1.1bar.

10.8 AFR once on boost from memory.

8 knock max @ limiter in 3rd for 2-3seconds. Super safe tune thus the lower power figures.

RPM limit dropped to 7,000rpm.

Despite the low numbers the car has no problem sliding turn 1 @ QR in 4th and turn 6 in 3rd. Using 235/45/17 tyres.

I also have plenty of tyres to go with the sale.

Car is a complete package ready to drift, hill climb or hardpark at your local Macca's.

And now some pictures.

5721676761_7957f98566_o.jpg

5721690381_d880e99fa0_o.jpg

5722240068_7e4340398c_o.jpg

5722238448_dc3e46315c_o.jpg

5721686139_3d548c4fb8_o.jpg

5722248152_d12b6dc57e_o.jpg

5722246424_f1040b79f6_o.jpg

5722241946_38f44ab41b_o.jpg

5722241308_86b8594c21_o.jpg

4049267011_04dccca21c_o.jpg

5722243168_15c04cc1ce_o.jpg

5721678821_a754efcb92_o.jpg

5722230686_ec7016c4f0_o.jpg

5722231190_fcab7fef0d_o.jpg

5721673513_d3aea2d458_o.jpg

5721686575_b1fa7d3780_o.jpg

This is what it'll look like if sold with R32 GTR wheels.

4049265679_71574a3f64_o.jpg

I like turtles.

Link to comment
https://www.sau.com.au/forums/topic/365263-sr20-cefiro-lots-of-fruit-qld/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...