Jump to content
SAU Community

Recommended Posts

Up for Sale is a STD R34 GTR intercooler core.

I bought it off one of the SAU:SA execs years ago for my 32 GTR

i have had it on my GTR which produced over 360rwkw with it.

it is in great condition, looks much better than the STD 32/33 cores because its not sprayed black.

Looks cool from the front.

NOTE: will not fit a 34 GTR because the I/C sensor bung has been plugged and welded.

$350.00 excl postage

PM me or SMS 0421 125 183

Link to comment
https://www.sau.com.au/forums/topic/365733-r34-gtr-intercooler/
Share on other sites

Hi mate,

Just wondering how much use the intercooler has had.

Would you be able to post to SYD? and if i could get a couple of photos to [email protected]

Also, i would be replacing the stock 32 Gtr intercooler, will this bolt on directly to existing piping etc?

Thanks mate.

JD.

Yeah mate,

this cooler will bolt straight on, no modifications needed. just take off old one and put on the 34 GTR one.

I'll try and get some photo's to you over the weekend.

i would say that the cooler has had maybe 60,000kms useage in its life.

there are no bent fins or damage to the core or end tanks.

you'll see when i get the pics to you that its in pretty decent condition.

you'll definitely like it better than the STD 32 GTR one, just cause its more visible not being black, and the 34 GTR cores are said to flow better.

people have made up to 380kw with them, i had this one to 370kw

Hey mate,

Thanks for the reply.

Pretty keen as i want a stock Intercooler as trying to keep the car clean and off radar but also a street weapon.

Have read up, the 34 GTR intercooler is quite a bit superior to the older ones, slightly larger and better looking as you said.

If you can get me the photos am very keen as i said.

Next issue would be shipping and a deal.

Email me some pics this weekend and lets talk.

Thanks mate,

JD.

p.s. if you had any photos with it on the car would be awesome just to get an overall feel.

I dont mind posting it interstate

I dont have any photo's from the front of the car.

the best ones i could find are attached. they're not very good and the car was dirty at the trackday.

will look on the camera at home, might be some still on that?

I'll get some pics of it tonight.

post-43725-0-37391900-1307596558_thumb.jpg

post-43725-0-10339500-1307596570_thumb.jpg

Here are some pics

as you can see the core is in pretty good condition, no big bends in the fins. its a little dirty mainly cos i havent cleaned it since it was taken off by the mechanic. but it does scrub up nicely.

here is one with it on the car

post-43725-0-80378300-1307663680_thumb.jpg

you can see the core is good.

also you can see where the bung for the temp sensor in a R34 GTR has been welded up because the R32 GTR doesn't have the sensor, as well as R33 GTR's

post-43725-0-01846200-1307663889_thumb.jpg

CORE BACK

post-43725-0-38418700-1307663905_thumb.jpg

post-43725-0-28586700-1307663929_thumb.jpg

post-43725-0-12519500-1307663948_thumb.jpg

post-43725-0-19072200-1307663966_thumb.jpg

CORE FRONT

post-43725-0-80898100-1307663993_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...