Jump to content
SAU Community

Recommended Posts

1. Genuine Volk GT-C Top Secret Gold 19"x9.5 +12 ALL ROUND, FACE 2 (Big Break Setup) GTR Fitment

2. Tyres are all 275/30/R19 Achilles on the fronts Kumho Rears

3. 4x Volk Center Caps and 4x Rays Metal Tyre Caps Inc

6014_124705336405_537951405_2854913_6408195_n.jpg

6014_124700936405_537951405_2854774_2583680_n3.jpg

2.jpg

2011-05-30150951.jpg

2011-05-30151353.jpg

2011-05-30151513.jpg

2011-05-30151719.jpg

$3400 no trades, No response means not interested in your offer. Shipping at purchasers expense.

Chris 0422515046

Edited by Dos

Hi Chris, just a heads up. I have the exact same wheels and specs 19x9.5 +12 face 2. This size is only a B disk which mean they won't clear brembos.

They were previously on BAKES r34. He had to run a 5mm spacer. That rim dish size you show of approx. 70mm, mine are more like 85mm.

I think you might find they are +11 which is A disk to brembo. Maybe pop a wheel off to confirm.

You can check the Rays wheel charts to confirm.

Bump for awesome wheels. Good luck with sale.

Yeah must be a greater offset because im not running any spacers and I clear the brakes fine. Ill look into it. Cheers for the heads up.

Would these clear Brembo's on a 350z?

Yes they would. 19" at these offsets should clear some serious brakes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...