Jump to content
SAU Community

Recommended Posts

All parts located in Vic, CBD area - pickup preferred, will post some items at buyers expense.

Email [email protected]

Pics to come.

ATP 'frank' turbo, stainless manifold, t3 flange, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Roughly equivalent size to GT30r. Braided lines included. $1300ono

Stack 8130 dash with sensors for oil temp, oil pressure, water temp, $1800 firm > cost over $2200 from vsport australia, excellent condition.

V8 supercar GT wing, 1.6m wide x 12" chord length, comes with mounts and allows adjustable angle of attack up to 20 degrees, painted black, red NISSAN sticker, excellent condition, $1000 for the lot. Will also include black R34 boot lid with pre-mounted reinforced crush tubes to mount the wing for free (will fit R34 GTR or R34 GT-T)

Racepace 3.5" rear muffler, super high flow but quiet $500

will throw in 3.5" cat-back mild steel piping to suit R34 if buyer wants it, i think the muffler can be used on r33 skyline too

used momo steering wheel, center horn button has been shaved around edges but will sit fine bolted to a boss kit, only have 5 out of 6 allen bolts (lost one) $100

used trust shift knob suit r34 skyline, 10mm thread (M10 x 1.25), will also fit s14 200sx, should suit other skylines, very good condition $40

used genuine nismo 1.3 bar radiator cap $20

2 x used genuine hks ssqv blow off valve flange adapters to suit skylines $20 each

r34 gtt triple guages, no housing $40

pair of s15 dmax vented front fenders +30mm brand new $280

Sorry for the delay.. PICS

also added s14 ganador mirrors, electric mirror control via factory loom, blue lens, very good condition. $330

post-10650-0-70869300-1307160366_thumb.jpg

post-10650-0-53106700-1307160375_thumb.jpg

post-10650-0-15306000-1307160386_thumb.jpg

post-10650-0-30205700-1307160398_thumb.jpg

post-10650-0-30938400-1307160408_thumb.jpg

post-10650-0-12424500-1307160418_thumb.jpg

post-10650-0-24915000-1307160429_thumb.jpg

post-10650-0-09945600-1307160439_thumb.jpg

post-10650-0-06657400-1307160453_thumb.jpg

post-10650-0-08632800-1307160463_thumb.jpg

post-10650-0-08018800-1307160484_thumb.jpg

post-10650-0-97890900-1307160498_thumb.jpg

post-10650-0-32930300-1307160511_thumb.jpg

post-10650-0-57088000-1307160523_thumb.jpg

post-10650-0-35123400-1307160537_thumb.jpg

post-10650-0-55676300-1307160740_thumb.jpg

post-10650-0-16450900-1307160753_thumb.jpg

correction the turbo is T2 flange

bit smaller than a gt30... i don't really know the specs it was on my car when i bought it. the induction pipe is included.

post-10650-0-87703500-1307162078_thumb.jpg

post-10650-0-65264000-1307162091_thumb.jpg

post-10650-0-81396600-1307162470_thumb.jpg

oh well, yeah i've had a fair bit of interest in the wing, but mostly interstate! even had a dude in Canada who wanted a shipping quote lol... Not really keen to send it interstate let alone overseas! I'm in no rush either way.

oh well, yeah i've had a fair bit of interest in the wing, but mostly interstate! even had a dude in Canada who wanted a shipping quote lol... Not really keen to send it interstate let alone overseas! I'm in no rush either way.

V8 wing in canada. That would be cool.

What model V8 supercar is it off? VY/VZ?

  • 2 weeks later...

Hey mate spoke to the other day on the phone when you where at re autoworks havnt heard back still waiting to here from you about picking it up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...