Jump to content
SAU Community

Shed Clean-Out! Dirt Cheap Bits Inside


Recommended Posts

Hi all,

I'm clearing out the shed of some un-wanted gear off my car that has either been changed, upgraded etc. Please note this is my first attempt at selling stuff on SAU, and I work alot, I shall do my best to reply to PM's, texts etc. and arrange freight/pick-up etc as quick as possible, but do be patient.

Best bet/preferred for contact is to PM me on here or text as I can't answer my phone at work.

Contact No: Josh 04 3774 5147

Can freight all items at buyers expense, pick-up is preferred from country south-west vic, exact location will be gladly given to interested buyers but would prefer not to list for security and privacy.

Also happy to deliver items/meet buyer half-way at buyers expense (fuel costs) if distance is reasonable.

Standard parts are off a R33 Series 1 GTS coupe' RB25DE

Fusion EN-AM300200 amplifier, 2 channel, runs 70w rms per channel, suitable for running a pair of 6X9's, is a flow through/daisy chain style amp so another amp can be connected to the same pair RCA leads, bridgeable to run 180w rms, good working order, removed as I went to a bigger system requiring a 4 channel amp. More details here. $30

post-74990-0-12128800-1307252039_thumb.jpg

Sub box built specifically for boot of R33 2 door, sits above the fuel pump area with the battery/fuses re-located, and HICAS ECU mounted to the drivers side, very snug fit. Made from 3/4 MDF with loads of liquid nails and screws, extremely solid, 2 separate compartments, "face-plate" made from 12mm MDF. Average condition, needs the "face plate" re-done/re-trimmed. Had 2 10" subs inverted mount running in it, again has been changed for bigger build, has filler to make the boxes ~14L each, could be removed to go as big as ~25L each. Could be cut out to fit 10" subs normal mount with spacers, too small for 12"s. $30 to good home

post-74990-0-62387700-1307252975_thumb.jpg post-74990-0-85462900-1307253080_thumb.jpg

Stock JECS fuel pump, upgraded, was in running car on removal, but slightly noisy (can be heard on priming and outside the car when running) $15

post-74990-0-01153000-1307253315_thumb.jpg

Two 205/55/R16 91W BCT S600 tyres, changed due to flats pots and worn shoulders, tread varies from %15-%60, suit drifting or burnouts. Not road usable! $50 pair

post-74990-0-12388100-1307253687_thumb.jpg

One Mazda RX8 space-saver spare wheel, 5 stud, off my old car, never used. $50

post-74990-0-10653700-1307253761_thumb.jpg

Standard sway-bars, no links, "D" bushes included $30 pair

post-74990-0-73125600-1307253873_thumb.jpg

Standard springs and shocks, no visible leaks, surface rust, typical condition for age $50 the lot

post-74990-0-99441400-1307254019_thumb.jpg

Genuine Mazda 5w-30 rotary mineral oil, un-opened, paid ~$70 for it yet never got used. $50

post-74990-0-07324300-1307254147_thumb.jpg

Speco-meter 2.5" (I think) electronic oil pressure gauge and sender, good working order, needs wires extended, lights up yellowish standard globe color $20

post-74990-0-42162800-1307254330_thumb.jpg

Random "Nakamichi" CD head unit, has AUX in, came with car, suit daily driver $10

post-74990-0-38847100-1307254412_thumb.jpg

2nd hand oxygen sensor, unknown age, only noticed .5L/100km improvement when changed, suit if you have an absolutely dead one or for testing etc. $20

post-74990-0-28342100-1307254585_thumb.jpg

6 standard coil-packs, acted up on stone cold nights at full load over 4500rpm when car was N/A, taping/greasing may help, suitable for diagnosis or temp-replacement $40

post-74990-0-67542000-1307254755_thumb.jpg

Have a few more small items for sale, but it's raining hard so can't get photos, will update later on.

Cheers, Josh

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • You won't make it out of your driveway. Both your rear wheels will go in whichever direction they feel. Your Hicas rack or a lockout bar is required to keep your wheels straight. 
    • Updating results.  Using ATR45SS-0 model VS UHF57-900. Those two are very different turbos, different wheels sets with different wheel hub profiles but yet with almost identical result. I’m intrigued with both turbos performance. ATR45SS-0 was a 61mm turbo first developed in May 2020, UHF57-900 was a 62mm turbo developed in March 2024 as a powered up alternative of a G30-900. On paper ATR45SS-0 maxed at 563rwkws, while UHF57-900 maxed at 568rwkws. ATR45SS was slightly more responsive with slightly better power band through the mid range.  Road driving ability, ATR45SS-0 had better throttle response, felt more robust under throttle, as it wakes up earlier. I think G series wheel hub design made it to have higher inertia under light throttle. Doing bit more prototype work in the next few weeks, will update result when its back on dyno again. ATR45SS0 Blue, UHF57-900 Red Chequered tuner's Dynapack hub dyno, E85 fuel. Mod list is in video below video_20240604_114214.mp4    
    • Did you run the power cables for the mac valve to the other side of the car near the fusebox? Utilizing the stock boost controller cables? or did you run new ones?
    • Hey I have a potentially stupid HICAS question 🤣 I'm currently doing a full hicas delete, Power steering pump modified to non hicas, all lines removed from the car along with all electronics. My stupid question is - Do I need a lock out bar? is there any reason why I cant just remove everything from the rear end? I already have a lock out bar but thinking to save a few extra grams I could also get rid of the arms and tie rods as well and just run it with nothing in its place? or would it have a negative effect on handling?
    • Hi how are you guys?  I know i have been absent for years but im coming back slowly guys just wondering if anyone know where the ball joint on the NISMO arm front and rear can be replaced with OE parts?  Also  i know this is not the thread looking for springs and blistein shocks for the 260rs. Please advcie     cheers    yudy
×
×
  • Create New...