Jump to content
SAU Community

Recommended Posts

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst
Link to comment
https://www.sau.com.au/forums/topic/368341-r33-gtst-performance-parts/
Share on other sites

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Hey mate of memory the microtech lt12s didnt need its own map sensor it uses the cars standed sensors .It dosent use the airflow meter so u can remove that and it comes

with the plug and play adapter for a skyline loom.So as simple as plug it in hook 1 manifold presure line then drive it to tuner

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700 SOLD

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600 SOLD

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...