Jump to content
SAU Community

Recommended Posts

parts are currently on the car but I'll start taking them off within the next few weeks

Splitfire coilpacks in rail - $450

Denso 440cc injectors on standard rail, guy replaced all o rings when I bought it, never fitted on my car sad.gif

- $450

Malpassi rising rate fpr - $150

Welded diff r33 4.11 i think, to fit r 32 just swap the rear hat on the housing - $150

Pair of lambo wheels 17x9.5+44 (can b reversed for mega dish) - $150 no shoes

R34 gtt turbo with elbow and actuator

etc no play great condition - 450

R33 elbow - 50

white East bear fibre bonnet plus flush bonnet pins- 500

Twin pipes straight through after cat, sounded ridonkulous on my rb20, 99db at 5000rpm with 3" dump straight through - 300

Metal intake pipe for flutters - 80

Decat pipe 3" 80

EEC boost controller withgauge hi lo setting with in car adjustability - 250

Really pains me to get rid of all the goodies But just can't afford to get defected with all These fines and shit

Will post pics and edit stuff when I get on a computer

0488 583 800 Jesse

Link to comment
https://www.sau.com.au/forums/topic/369441-get-me-off-defect-sale-sa/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...