Jump to content
SAU Community

Recommended Posts

I have searched and searched for a wiring diagram and have had no luck.

I don't particularly want to go joining wires until i find the right ones just in-case i cause a short and blow something.

On the auto there is 4 plugs, one with a 4-pin connector which goes into the side of the shifter on the drivers side of the box,

and on the passenger side of the box are 2 x 2-pin connectors and 1 single pin connector.

Which plugs and corresponding wire colours wires do what?

The auto box has overdrive so I'm guessing some of the wires are for this.

I need to bypass the inhibitor switch to get the car to start again as i have almost completed my manual conversion and also need to hook up the reverse lights.

Please HELP :/

I did ask this question in my other thread but am yet to get a response and i've been stuck for almost 2 weeks.:(

Link to comment
https://www.sau.com.au/forums/topic/369703-mr30-wiring-question/
Share on other sites

Thanks Dennis,

I'm at work at the moment, i will give you a call when i can get back under the car either tomorrow or Monday if that is OK with you.

Will be great to hear the beast running again now that I've just preformed a service on it and added a pod filter, some extractors, 2 and a 1/4 inch exhaust system and a 6 inch cannon.

Regards

Shane.

Ok call me on 0406142529 and we can try sorting you out.

Cheers, Dennis

I have to go out, but when I return I'll post some pics of service pages so you can try to work it out.

Wiring colour codes are:

B = Black

W = White

R = Red

G = Green

L = Blue

Y = Yellow

LG = Light Green

BR = Brown

OR = Orange

P = Pink

PU = Purple

GY = Gray

SB = Sky Blue

In case of colour coding using a stripe, Base colour is first followed by stripe colour

eg. L/W = Blue with White stripe

Cheers, D

sweet thanks dude!!!

I have to go out, but when I return I'll post some pics of service pages so you can try to work it out.

Wiring colour codes are:

B = Black

W = White

R = Red

G = Green

L = Blue

Y = Yellow

LG = Light Green

BR = Brown

OR = Orange

P = Pink

PU = Purple

GY = Gray

SB = Sky Blue

In case of colour coding using a stripe, Base colour is first followed by stripe colour

eg. L/W = Blue with White stripe

Cheers, D

Hi Shane,

Attached is 6 pics.

Pict 0011 is the Ignition System

Pict 0010 is the Charging System

Pict 0009 is the Starting System

Pict 0008 is the Power Supply Routing

The second Pict 0009 is the Overdive Control System

The second Pict 0008 is the Kickdown Switch System

All these are for the Australian car.

From what I read in the manual, the 4 pin plug is from the Overdrive control switch, the 2 pin plugs are Kickdown solenoid & Overdrive cancel solenoid. The single appears to be the Overdrive indicator switch as well, possibly indicator light.

The Inhibitor switch also has 4 wires but I don't know where they go as I don't have any automatic vehicles to look at for you.

If these picture diagrams don't help, your more than welcome to come down and look at the manuals, as I'm just at Campbelltown.

Cheers, D

post-2962-0-45252200-1309649066_thumb.jpg

post-2962-0-04927600-1309649085_thumb.jpg

post-2962-0-67385100-1309649112_thumb.jpg

post-2962-0-74017500-1309649129_thumb.jpg

post-2962-0-95567200-1309649912_thumb.jpg

post-2962-0-80281000-1309649931_thumb.jpg

Thanks mate, those circuit diagrams were exactly what i needed.

All sorted now, it turns out that the 4 pin connector is all i needed to use,

just join the black/white wire to the green/yellow wire to bypass the inhibitor

and the yellow wire and the red wire to the manual gearbox reverse switch wires.

Regards

Shane.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...