Jump to content
SAU Community

Recommended Posts

hi guys im starting a new build on my car and have a few parts that im wanting to get rid of

i have a jun stroker 2.7 the crank and rods have done 7500ks in the car and have been pulled out and tested and there is nothing wrong with them just to make sure as my old pistons are used i will chuck them away.but with this offer i have a brand new set of pistons,nitrated rins and pins to go with it at an extra cost

$3000.00 for the crank and rods.or $5500 as a full stroker with the brand new pistons.

also have a full set of NITTO nitraded intake valves and stainless exhaust valves that have also only done 7500ks

$400.00 for the set

there will be much more to come as i start the build.

Link to comment
https://www.sau.com.au/forums/topic/369705-jun-stroker/
Share on other sites

hi guys im starting a new build on my car and have a few parts that im wanting to get rid of

i have a jun stroker 2.7 the crank and rods have done 7500ks in the car and have been pulled out and tested and there is nothing wrong with them just to make sure as my old pistons are used i will chuck them away.but with this offer i have a brand new set of pistons,nitrated rins and pins to go with it at an extra cost

$3000.00 for the crank and rods.or $5500 as a full stroker with the brand new pistons.

also have a full set of NITTO nitraded intake valves and stainless exhaust valves that have also only done 7500ks

$400.00 for the set

there will be much more to come as i start the build.

valves are sold .

i can now do the stroker for a cheaper price as i have found a cheaper supplier for the pistons they are still going to be the same nitraded ringsand pins with brand new pistons.i can now do it for $5000.00 for the complete kit nearly half the price of brand new as the crank and rods have only done 7500ks its like new.

.http://www.junauto.co.jp/products/cylinderblock-part/crankshaft/rb26.html?en

Link to comment
https://www.sau.com.au/forums/topic/369705-jun-stroker/#findComment-5906165
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...