Jump to content
SAU Community

Recommended Posts

Hi Guys,

Due to needing new tyres amongst other things, im having to let go of my spare r33 gtr wing. the wing is an original GTR item in QM1 white. it was removed from my car following a panel beater attempting to remove it and causing a small hairline crack in the plastic beneath the brake light, which was easily fixable, but the shop offered to get me a new one, so i figured why not? and i got to take the original home. the wing comes with black centre caps as the originals were used with the new wing they gave me. perfect or another 33GTR with plans to get the carbon centrecaps or a 33gtst.

Asking 400 ONO, feel free to make me an offer on 0400 865 664 or via PM. inspections can be arranged.

photo1.jpg

photo2.jpg

photo3.jpg

photo4.jpg

Link to comment
https://www.sau.com.au/forums/topic/369806-r33-gtr-rear-spoiler/
Share on other sites

Interested to sell the endcaps seperately if they're in great condition?

re this, UPDATE TO THREAD: wing will be posted with original GTR end caps as i have arranged a swap with a friend who has the correct caps for the wing.

Man start ur own thread don't hijack mine and try to poach buyers. I'm selling bc I need the money, not bc I want to so stop trying to make it harder for me.

  • 4 weeks later...
  • 3 weeks later...
  • 1 month later...

Hey is it still available??

sorry havent checked the thread in a while! yes its still available.

no i am not selling the brakelight seperate...

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...