Jump to content
SAU Community

Recommended Posts

I am looking at getting some better handling from the s1 stagea.

have been told the front end is GTR and the rear is gtt. What most people cant tell me is if the front is 33 or 34 GTR. I have been told 33 from some work shops and others say its 34.

I replaced my tie rod ends and they where the same as 34GTR so i am thinking the power steer rack is 34.

I am after these bits if that help's

adjustable pillow tension rods

adjustable front upper arm

tension rod bar

Nismo reinforced steering mount bushes

Nismo sway bars ( front / rear)

Nismo front Under-Floor reinforcing bar

Link to comment
https://www.sau.com.au/forums/topic/370204-info-on-stagea-handling-bits/
Share on other sites

Not sure about series 1 but I think it's the auto series 2 that has the GTT rear.

Hopefully chuckie sticks his head in here, I think he's quite knowledgable.

Front upper arms should be 33gtr and rear upper arms any R33/S14 upper arm should fit (I've got R33GTSt rear upper arms on my auto s2).

Swaybars, 33gtr should fit front and back (auto s2 has a wider cradle and it's a much tighter fit). Stock 33gtr swaybars are an upgrade or just go with Whiteline (I have them in my 32).

Never heard of a front underfloor reinforcing bar..

Tension rods.. do you mean castor rods?

Don't get too hung up on the whole "Nismo" thing, there is often better aftermarket stuff for cheaper.

Haha true true. They are just the parts i found on nengun but i will be look for cheaper.

Yer i think there castor rods nengun called them tension rods.

So chuckie do u know if the s1 power steer rack is 34gtr?

Also where is a good place to look in Perth of the bit's i am after?

i would go to jshop if i was still working there and if it was still open lol

Not really any places with new stuff, people like Steve May (maytech@bigpond.com) and JPC will have some second hand stuff and can source things from Japland for you.

My regular online stores that I buy from are: justjap.com (over east), nengun, RHDJapan, greenline, SummitRacing (in the US). I also buy all my silicone bends from ASI_Performance on ebay, good prices and fast delivery.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Car is now back - I have the Nismo fender extensions on it too. Body place did a really good job with melding them to fit the sedan.   I'd take a photo of the whole car, but it's somewhat hard to do from where it's parked in the carport. The OEM'ness is growing on me. As is the desire to buy wheels - But it would be flat out dumb to buy maybe fitting wheels with minimum precision and rush to fit them before going on a Tasmania road trip. Probably better to do that one with OEM spec wheels on it. I also bought a pod filter. It is not OEM spec.
    • The 32 still sits untouched with the broken gearbox. So a little off topic but not worth having a whole new thread. The daily starlet has gotten back on the road after 9 months. Suspected blown HeadGasket at a track day resulted in a bit of scope creep rebuild. The motor got a full tear down, pressure testing, machined for MLS HG, ARP head bolts, new bearings, all new seals etc also noticed some fatigue on the stock exhaust manifold so obviously the answer was a steam pipe manifold and highflow turbo. The exhaust was also looking tired with some rust holes. So I got a slightly over kill system made up consisting of Vibrant resonator and muffler with a highflow cat. The new highflow turbo had a larger inlet so instead of adapting the old intake got a case of the might as wells and had a nicer alloy intake made After the run in was finished i bought a (probably considered retro/vintage) EBC becasue "might as well"
    • Pretty stout result. How much boost? Anything left in it?
    • Just dropped the car off at MX5 Mania to install the intake plenum and give it a little retune  My impatience hates the waiting game 
    • SAMSONAS      Just saying      U know and we know U wanna     Just a matter of time....
×
×
  • Create New...