Jump to content
SAU Community

Recommended Posts

I just recently installed a exhaust i imported from the USA. A little more on the expensive but oh my god so worth it.

http://www.motordyne...4205a029f5c97d5

I got the Advanced Resonate Tuning Pipes installed aswell as the Shockwave)) TDX2.

A youtube example of this combo can be found here:

(Black Car, Skip to 1:30) - Not my car btw

The exhaust combo has 0 drone from what i can hear, and when you put your foot down - people will know. Its possibly one of the loudest exhausts i've heard on a street car, and yet so quiet when you want it to be.

Ahhh forgot about the Motordyne. What an awesome sound. Note to OP, there is absolutely no beating the sound and possibly performance (albeit minimal) of a true dual system. The Y pipe single systems just can't compare.

Aftermarket Sedan Exhaust Compilation

Below is a compliation of exhaust setups. Both aftermarket, modded OEM and full custom.

http://g35driver.com/forums/g35-sedan-v35-2003-06/190116-aftermarket-sedan-exhaust-compilation.html

Note to OP, there is absolutely no beating the (possibly) performance (albeit minimal) of a true dual system. The Y pipe single systems just can't compare.

Really?

I'm not sure if its different on the V compared to the Z, but in a NA application the Y pipe systems are better. The scavenging in the low end from combining the two streams gives a noticable gain over a true dual, but the difference in the top end from what I've seen has been in the 2-3rwkW region (which is measurement error).

On the butt dyno I had a mate who went from a Y pipe to a true dual, and he noticed a big drop in tractability with nothing in the top end. He eventually went and had a custom crossover made.

My favourite sound so far has been the HiTech catback on my Z. No rasp, just a nice deep note with an angry edge. Compared to my ultra-raspy current setup (Top Speed Extractors, Berk cats, Buddy Club exhaust) it sounds a lot deeper.

quote me correctly and the context makes more sense:

Note to OP, there is absolutely no beating the sound and possibly performance (albeit minimal) of a true dual system. The Y pipe single systems just can't compare.

Notice I refered to the performance as a "possible" gain. The last quote is therefore stating the single systems can't compare for sound as referenced first in the statement. It may have been clearer if I'd put the bracket before "possibly".

So I stand by my post, The dual systems I refered to above to me sound better (deeper) than a single system.

It would be worth noting that the true dual systems from Fast Intentions, Motordyne and Stillen have a crossover section, as Scathing mentioned, which technically does not make them true dual like the HKS, Injen & Invidia. The manufactureres still call then True dual tho

Wiki is in on the act:

http://www.350z-tech...tems_(True_Dual)

Edited by mosoto

I DIY as I have a mate who has a workshop and hoist. If you don't want to DIY, Search for Kermit on these forums. He has a workshop in Welshpool and he specialises in stainless and custom fab.

quote me correctly and the context makes more sense:

Notice I refered to the performance as a "possible" gain. The last quote is therefore stating the single systems can't compare for sound as referenced first in the statement. It may have been clearer if I'd put the bracket before "possibly".

Fair enough. I thought you were saying that the true duals will give a performance gain, even if it is minimal. In my experience its pretty much guaranteed to give a gain that's better than stock, not as good as a Y-pipe system. Performance-wise a Y-pipe setup is a clear winner.

I haven't heard too many true dual systems aside from the APS, which I thought was quite similar to the Nismo exhaust. But exhaust sound is a very personal choice.

I Highly Recommend you don't get the Headers from USA or any other Left hand drive country. As they made for Left hand drive (steering rack interference), but you are more than welcome to try.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...