Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive decided to part out my car and sell it soo ive got the following parts for sale. Just PM me if your interested :)

Genuine Nissan Aero Front Bar with Fog Lights

This is a genuine nissan Aero front bar which was bought brand new and is less than 2000KM old.

It was repainted pewter silver and is in mint condition with little to no scratches on the bar.

These front bars are $3000 from Nissan.

Price: $1800 ono

I will swap for a stock ADM bar plus cash

post-86687-0-09503200-1311659592_thumb.jpg

post-86687-0-41161800-1311659644.txt

post-86687-0-04455900-1311659662_thumb.jpg

Custom made carbon fiber front strut brace for s15/s14

This front strut bar was custom made and is harder than any other metal strut brace you will ever find.

Price: $350

post-86687-0-69453100-1311659630_thumb.jpg

post-86687-0-41264600-1311659674_thumb.jpg

Front and Rear Whiteline Sway Bars

Im selling both front and rear whiteline sway bars with the endlinks.

Both these bars are less than 2 months old.

I will not seperate the bar and the endlinks, must be bought together.

Google for pics.

Price: $250 each

Smoked Yashio Tail lights

These yashio tail lights are the smoked tail lights, so this means they were smoked in the factory,

not some dodgy backyard job. These style of tail lights have been discontinued from the Yashio Factory, so they

are becoming harder and harder to find.

Price: $350

post-86687-0-03330800-1311659569_thumb.jpg

BC BR Racing Coilovers

These coilovers are 3 months old and after owning a pair, i must say i am very impressed with the quality of them

The BR series coilovers come with:

Pillowball upper mount

Camber adjustable top mounts

Aluminium top plates

30 way adjustable damping

Adjustable spring platform

Height adjustment via bottom mount to retain full damper travel

Bearing mounted upper front spring platform

Dust boot to protect damper seals

There are no problems with these coilovers and i am just selling them because I am taking my car back to stock.

Price: $700 or $600 and swap for standard suspension.

S15 Standard 6 Stacker CD player

This is the stock s15 standard 6 stacker CD player which I took out of my car and replaced it with an aftermarket headunit.

Price: $300 ono

Edited by s15kid
Link to comment
https://www.sau.com.au/forums/topic/372123-s15s14-bits-and-pieces/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...