Jump to content
SAU Community

Recommended Posts

ok ppl heres the dillyo

ok so today i decide to finely get of my but n change my locks on my 32 which i have been meaning to do in awhile.

So i started with the 2 doors took the door cards of n everything n changed the lock which was quite ezy.

So the next 1 i did was my IGNITION which was a bit more complicated.

most of you guys would no why i.e taking the surrounding off to get to the lock and steering lock cylinder

Ok so i got the old 1 off and the new 1 on at lightning speed lol all surroundings back on and then as i went to test it

and kick her over thinking shed scream in to life . . . . . . . . . . . NOTHING

Everything was work she had spark fuel in the tank. But there was 1 sound missing the sound of that noisy fuel pump not priming.

So i checked all my lights and acc which were all working except for my elec windows

So by this time i was loosing sunlight so i thought id quickly check the fuses just in case n they seem to be ok.

And now im sitting on the laptop wondering what it could be

so if any one has the slight clue PM ME PLZ

Thanks guy

REWARD - AFM or FPR from a standed RB26

Link to comment
https://www.sau.com.au/forums/topic/372247-help-help-help/
Share on other sites

Fuses seemed ok ? make sure u test them lol

Grab a multy meter and test through the ignition barrel harness each wire on each key section off acc on etc.... and make sure their all fine... if no luck there im no auto elec so maby u should get a mobile auto elec to come test some shiz out ?

also if its after market get the installer to chek their work mainly if it was installed recently ...

other than that im outa ideas...

Good luck mate

Link to comment
https://www.sau.com.au/forums/topic/372247-help-help-help/#findComment-5936088
Share on other sites

ok will do with the multi metre mate

ooooo n im not sure if this is the problem but its a rb26 in a gtst r32 n coz my old ignition was from a gtr n these locks are from a gtst so i was thinking it could be somthing in the ignition cylinder

Link to comment
https://www.sau.com.au/forums/topic/372247-help-help-help/#findComment-5936215
Share on other sites

OK ppl i spent prob bout 2hrs today working on the car and it was exactly what i thought it was.

for all u ppl that say R32 GTR locks are the same as GTST. Well your only half right cause alll the doors and boots are the same but the ignitions are different

so what i did was unscrew the back loom of my original lock cylinder n just simply swapped them over

SO ALL IN ALL CASE CLOSED

Link to comment
https://www.sau.com.au/forums/topic/372247-help-help-help/#findComment-5937731
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...