Jump to content
SAU Community

Recommended Posts

depends on what you want to run it on ?

how loud you want it?

cost range?

brand loyalty?

size?space you have

what ohm load your running it at ?

how much do you want to spend on wiring upgrades and alternators, battteries ?

do you want class, A, AB, D, Hybrid ? why mono ? you can do stereo amps as well ?

do you want sound quality, and control of your woofer ? or just bass

what size woofer, what box is it in ?

a 50 dollar 1500 watt mono block is nasty

and 2000+ dollars would one be fine

but Im sure as you can see you need to answer more questions to make a informed decision and be happy with it

why 1500 watts, ? RMS or max power ? real world ?

good power for a mono block, is 24,000 watts at 1 ohm. but you battery load would be retarded

Edited by sapphiregraphics

powering what ? a 900 watt sub from jensen or amp from jensen ??

the sony is a small step up at best ? it wouldnt be my first choice for a budget sub amp.

Edited by sapphiregraphics

Id suggest just getting a 900watt RMS (stated) or higher Kenwood mono D amp. Assuming thats a DVC/2ohm sub. They are cheap and dont sound too bad and will put out about 400RMS at 60hz at 2Ohm stable which is probably more than a sony "1500" could handle. But in all honesty sony dont really make high power subs so any $250 amp is likely to max it out

Edited by deano3350

it depends on all the thing i asked before?

and what kind of box the subs in

how loud do you want it?

do you have the subs model or ohm load, how many voice coils?

yada yada yada, as above

are you running a amp on the front speakers or deck power?

kenwood is decent cheap amp ?

the new sony speakers are rated around 1500watts "PEAK" power and around 400 rms, for anything more then a few seconds in the wrong box or clipping will kill the woofer ?

what are you trying to do exactly ? louder? deeper ? clearer ?tighter bass ?

it might be a waste of money to drop a big amp on a poor sub in a generic box , mounted wrong or x-over wrong ?

Are you after sealed or ported? how much space are you willing to lose? because if you want "reasonable amount of undistorted bass" your going to need to tune the box which Sapphire would be able to tell you all about

ok, well its a four ohm sub single voice coil, just want a resonable amount of undistorted bass

Like before

price range ?

amount of space you want to loose ? what kind of box do you have now ? sealed , ported, factory , generic , approx how big is it ?

sub model ? so I can see the Thiele parameters

what kind of music do you listen too mostly ? how loud ? and what source is it most of the time, MP3 , radio, CD ? some music lends itself to a different box , and same with loud volumes, safer for the woofer

what head unit type are you running, ? do you know the specs for line out voltage ? because if your amp needs high level inputs or converter that will make a difference ?

I take it this is in a R31 4 dr ?

do the front speakers use a amp or deck power ?

without answering these questions its hard to help you find options , just throwing a 2000 dollar amp on it wont make it sound better if its in free air, or the deck has convertors and playing MP3 at low bit rates

this might be as simple as a few bucks worth of poly fill, and reseal the woofer, change the crossover point or face the box another direction to make it sound better ?

about 300 bucks maybe more, space im happy to loose most of the boot, the box is a 50 litre ported, its an xploid 15 1500w thats all i know, i tend to listen to linken park, acdc etc in high quality mp3, im running a sony xploid 4x45 watt?, front speakers are deck power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...