Jump to content
SAU Community

Recommended Posts

Hey guys,

I've been struck with an absolute head-f**k of a problem that's incredibly risky to keep running, and I need to sort it this weekend.

I don't have the car all day Saturday, and I need to do a 65km round trip on Monday.

She's producing a stray current while running.

Starts off small at around 0.10v and as the temperature increases it settles at anywhere between 0.60 to 0.80v.

Being an all alloy radiator I can't risk running this any longer, as it's already been on the go for at least one week.

I only came to realise today that there is a current in the coolant.

I checked the main earth lead of the battery, added another earth from the terminal straight to the chassis, and another 2 leads off the motor onto the chassis in the engine bay, but the current persists.

I completely disconnected the ECU loom from the ECU,

completely disconnected the starter motor wiring, alternator wiring,

I completely disconnected the battery and took it out of the engine bay, only to notice that the car STILL somehow has current in it.

As the temperature drops, the current does also, very very slowly.

Has anybody here had this issue before?

I don't even know where to start looking. Stressing big time.

I'm not keen on simply attaching a strap from the radiator to the chassis to earth it out, as this will have a two fold effect and actually promote somewhere for the said current to go, directly into the radiator, rather than via the coolant.

Edited by Nic_A31
Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/
Share on other sites

I feel your pain!

After having & repairing 6 odd coolant leaks in about 4 months I realised something else was going on & checked coolant to find it reads almost 1 volt through multimeter.

All earths, etc are clean.

Currently in the process of ripping my car apart, redoing ALL wiring, cleaning all earths, adding extra earths, etc to try & sort the problem.

Have you tried flushing old coolant & replacing with fresh stuff?

Let me know how you get on...

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5953343
Share on other sites

must be me but just i read that and thought " hmm your coolant/ radiator has voltage, so? is that a bad thing? "

put rubber washers/stoppers from clark rubber from anything that the rad is mounted with to the car body? then again the coolant goes by the intake manifold which is grounded so it would still transfer to the rad.

again why is this bad?

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5953600
Share on other sites

Electrolysis. It causes corrosion and eats away at the insides of alloy radiators.

Can chew our radiators in a matter of days.

Radiator is sitting on brand new Nissan rubber mounts top and bottom, but like I said I'm reluctant to go adding any more earth straps directly to the radiator, that can do more harm than good.

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5953745
Share on other sites

Everywhere.

Local guys at radiator shop put de-mineralised water in it when diagnosing why temp. sensor wasn't triggering the fan relay.

I flushed with tap water and went fresh pre-mixed coolant.

Flushed it again today with tap water (ran probably 50+ litres through it) and radiator flush.

Bit of an update,

I've ran an extra earth from another bolt on the engine mount straight to the chassis rail.

Ran extra lead from negative terminal on battery straight to chassis rail.

3 from motor itself to chassis.

1 from gearbox to chassis.

1 from diff to chassis.

1 from cradle to chassis.

STILL got current in the water that sits at around 0.80v when at normal operating temperature.

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5954575
Share on other sites

When you removed your battery altogether how long did you wait before measuring voltage again?

Will take quite a while to dissipate...

Try again & wait a long time to see if voltage drops to 0/reasonable specs.

If that ends up being OK, run car with EVERYTHING on then turn things off one by one, waiting 5 mins between each to see if voltage drops.

Can also try removing fuses one by one...

Do you have many aftermarket electronics such as alarm, turbo-timer, EBC, gauges, amp(s), etc?

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5956078
Share on other sites

I let the car sit for an hour without the battery and the current dropped at the same rate/speed as when it drops with the battery connected.

I also disconnected every single fuse one by one, and noticed no differece.

I put a stock radiator in today, and

the hose itself registers a reading of 0.10v-0.15v.

The coolant registeres between 0.03v-0.04v.

WTF ?

Next thing I'm doing is rubber lining both tanks on the alloy radiator and putting that back in, see if maybe it was the mounts that was causing trouble.

Link to comment
https://www.sau.com.au/forums/topic/373167-stray-current/#findComment-5956142
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...