Jump to content
SAU Community

Recommended Posts

Hi guys,

I am quite interested in buying one of 250Gt/300GT, but havn't seen many topics about 250GT or 300GT sedan around, are these not popular? :blink: well, certainly 350GT coupe is more popular than these sedans, but the problem is that I am still on P plate and RTA says 350GT is prohibited for p-plate drivers :( :(

I have few questions here:

1. 250GT/300GT is the same as 350GT, all of them are rear-wheel drive, just talking about the driving experience, do they feel the same except 250GT/300Gt have less power?

2. 350GT share some parts with local 350Z or maxima, what about 250GT/300GT?

3. any figures about 250GT/300GT performance e.g 0-100 km/h, and fuel consumption?

if you have driven one of these sedans, please share some experience. anyhelp will be really appreciated... :thanks: :thanks:

Link to comment
https://www.sau.com.au/forums/topic/373808-v35-250gt-or-300gt/
Share on other sites

having owned a 350gt coupe and now on 250gt sedan

1st question - pretty much, they are all rwd and all good just power is low on 250 and 300 compared to the 350

2nd -a few parts are compatible yeah, id guess the exterior would be no difference in the skyline models, but mechanically they have diff engines obviously but some parts there are even ok to pick and choose from the maxima etc (depending what you want)

3rd - 250gt - I think about sub 8 seconds? - someone correct me there if im wrong, it does feel like it though. and fuel consumption is good, there's a thread already started here somewhere if you use the search button to see what people have posted on the fuel consumption records etc on all variants - but for me amazingly I got 700 kms out of a tank one time in the 350gt (have no idea how) and iv made it to 600-650 mark a few times too, but usually in the 500-550 mark, with the 250gt about the same 500-550 mark too.

other - suspension obviously different for the coupe and sedan, the sedan is way more forgiving and soft and nice ride - would be awesome for interstate trips, power is ok and enough for day to day driving and overtaking. make sure you get a series two if its a sedan - they look much better (with the face lift and back tail lights a bit different from s1) and also the interior is much improved than the s1 also less window motor problems and electrical problems all together are lowered than that of a s1

Hi Edi,

thank you for your reply.

sounds like you enjoy more driving a 250gt than 350gt? I realised there are two different versions series 1 and 2, is series 2 only available for post-2005 models? I saw some detail comments for the 250Gt series 2, keyless entry, one button engine start - pretty cool features only for recent year models.. it is amazing to see a 05 model 250Gt to have this feature. is this optional or stardard?

how much did you get your 250Gt if you dont mind I ask you.

I am in sydney, have contacted sportsauto and nagoya motor, they both have the 250gt and 300gt, anyone has any comments on these two dealers?

cheers,

well really it depends on what you like , there two different cars, the sedan is more for a class business man type, and the other is for the same guy but on the weekend plays sports lol, the 350gt coupe was powerful and looked better but the 250gt sedan has a more forgiving ride and not as low, i dont perfer one over the other really since there too different.

those features are optional for the car, and also (some one correct me if im wrong) but I think the s2 dropped the 300gt (3ltr version) and only had 250gt and 350gt variant.

also iv heard a few good reviews for nagoya motors

250GT S2 start from late 2004 to 2005 i think.

S2 have a different tail lights and better looking centre console!

Saw a S2 250GT at a car dealer with full back leather interior + heated seats for $16k.

I sold my S2 250GT early this year and they are nice car to drive.

Fuel consumption is around 10.5L-11L per 100km and i can get over 600km a tank using BP 95.

its not allowed anymore they filled in the loop whole, before it was the 350z only and now it states v35 350gt series too

sorry guys, it might me! I wrote a letter to RTA about a year and half ago to ask if 350Gt is legal for P-plate as 350Z is not. they replied to me with NO, and said the website will be updated very soon. few weeks later, they did include the greymarket imports like V35 350GT and V36 varities. DAMN ME!! Why did I ask???

Thanks Edi and Daniel, I think i will go for 250GT s2, they look very nice.. now start to source a nice one..

Hi, I went through this process when buying my V35. I ended up getting the 300GT.

On paper, I considered the 250GT under powered for a car that I wouldn't consider light in weight although my previous car was an MR2. The 300GT was 260HP, just 12-20HP less than the 350GT depending on the model and has a good trade off with fuel economy compared with the 3.5 litre (rated 8.6l/100kms vs 11.6l/100kms)

Not sure why the 3.0 litre Direct Injection engine had a relatively short lifespan. I don't think it was reliability issues as most of the japanese manufacturers have dropped the 3.0 litre engine from their range.

I found the 250GT and 300GT are softly sprung compared to the 350GT. I would suggest getting a second hand set of springs and sway bars from a 350Gt to make it handle better.

The other consideration is the Direct Injection has a tendency to clog the intake with a tar light substance from the crankcase gases and will periodically need cleaning.

This is based on the Series 1 so Series 2 maybe different.

Hi Mark,

How do you compare 250GT with 300GT in terms of performance ( 0-100km/h) and fuel consumtion? I do like 300GT as it is faster, particularly 2003 model with the much bigger "skyline" logo on the back. But I dont see many 03 models around.

Are 250GT and 300GT exactly the same size ( length, height, width)?

:thanks: :thanks:

any ideas about the 300GT? are they not availabe after 2005? i only see them between 2001 and 2003.

My premium 300GT was a 03/2004 build, it was written off in last yrs march hailstorm.

interesting factory parts were

- gun metal/ grey colour (not silver)

- center console was all black execept the circular area around the auto gear shift.

- Series 2 boot lid - larger 'skylight' letters across, no release ledge on boot, release from drivers or from remote key only.

I remember it was a big difference in engine response and power after a carbon clean at the wkshop even though the car only done less then a genuine 30k kms on the odometer. Mechanic said something along the lines of having to use twice the amount of carbon cleaner to do the job due to the build up.

Edited by nissan rules

Hi Mark,

How do you compare 250GT with 300GT in terms of performance ( 0-100km/h) and fuel consumtion? I do like 300GT as it is faster, particularly 2003 model with the much bigger "skyline" logo on the back. But I dont see many 03 models around.

Are 250GT and 300GT exactly the same size ( length, height, width)?

:thanks: :thanks:

The V35 is a standard size and weight across all models. I believe there is a 250GTm which is 40-50kg lighter than the other models. 260HP vs 215HP for the same weight car is a big difference so naturally the 300GT is faster. The big thing I noticed about driving the 350GT (drove a mates 6spd manual) was the impressive bottom end torque it produced, hard to compare though against an automatic.

The 250GT is rated at 8.3l/100kms which is comparable to most 4 cylinder 2litre cars of comparable HP. I know a few people who bought the 250GT because of this and because the VQ series is a fantasticly smooth running engine compared to a 4 cylinder.

It can be analysis paralysis though; I suspect if you buy the 250GT, you'll be yearning for more power of the 300GT.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...