Jump to content
SAU Community

Recommended Posts

hey who has gone solar and has any tips or recommendations on who to use or what to get etc. i wanted to do it last financial year but couldnt. thinking about 3kw is a good size as it gets pricey above that. what are people saving now on their bills. i heard $100 a month for average bills

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/
Share on other sites

Go big or go home thats what i have been told.

Depends on what you want out of it, ie: reduce your bill or produce enough so you get a $0 or -ve bill.

The old man got a 3kw system but has the extra capacity to double it by just adding the extra pannels. start at the 3 but make sure it can handle more by just adding the extra panels.

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5989383
Share on other sites

had a call back from true value solar today, they quoted 8500 for 3kw on sat and today 7400 due to changes by the government? still waiting on other quotes.

thinking about getting it put on the patio so it helps reduce temp underneath plus it will be near impossible to see it.

5kw systems are around the 12k mark but i havent asked about 5kw invertor with 3kw worth of panels

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5990681
Share on other sites

we used solar harness for our system and are verry happy with it

they were far from the cheapest but they use some of the best pannels and inverters available

we have 1.6kwh of pannels with a 3.4 inverter and havnt had a power bill since the middle of last summer

for us we calculated it as a 4-5 year break even

the main sugestion i can give is do your research especially on pannel and inverter types

some of the systems available use pretty ordinary gear that only produce power in full sun and then drop dramatically or even switch off with just a little shade

GWP

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5995814
Share on other sites

cheers guys, ive had a sydney rep from true value calling me regularly but i said im not in a rush. some companys i requested a rep to call never rang back

in regards to panels etc i noticed on one site they have 2 types of panel. bigger one that are from taiwan and assembled in china. smaller type are aussie and have been around for 10 plus years. lot more expensive for bigger ones so why would ya.

good idea on the solar forum paulie! using recent bills and solar calculator about $1700 can be saved a year with 3kw system. need to find out a bit more about the inverters :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5996307
Share on other sites

Have a read about the changes to the infeed tarrifs here Office of Energy - Residential.

Will take a lot longer to pay off the investment than it used to.

Heaps of info on the Whirlpool.net.au forums about solar installations.

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5997590
Share on other sites

You used to get 46c per kw, now you only get about 20c per kw. Personally I think they are a waste of time unless you pay for it fully then write it off and then look at the savings. If you need to take a loan, don't do it.

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5999571
Share on other sites

naa i dont need a loan or i wouldnt do it... i didnt want to commit to it last fin year as we were going overseas for a month but turns out the trip nearly cost us nothing so i can do it now.

i know i wont be as good off as others but just want my bills as close to zero or under if possible.

was warned yesterday about a few companys who they couldnt name, that some places will likely shut up shop in the next year or two as business winds down so take my time choosing who and what exactly i want...

i cant see us leaving this house in the foreseable future so it should pay itself off and then some :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/375334-solar-power/#findComment-5999586
Share on other sites



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...