Jump to content
SAU Community

R34 Gtt Rear Quarter Panel Gtr Conversion

sevan34

By sevan34,
in Exterior & Interior Styling

 Share

Recommended Posts

sevan34 Collaborator

sevan34

Posted
Posted (edited)

hii guys i was just wondering if anyone can help me im trying to convert my rear end with the gtr rear quarter panels and with the gtr rear bar which i will get from viva garage does anyone know if i can modify my nismo sideskirts to fit the rear panels and the front fenders or if i need to also get the gtr rear tailgate covers to ? i already have big wheels to fit on along with spacers ? anyone please help

Edited by sevan34
Jonno34 Mentor

Jonno34

Posted
Posted

i dont know if the vivagarage ones are for the gtr conversion... i think they may not be but im not 100%

they change the look and make em wider but pretty sure not gtr

Jonno34 Mentor

Jonno34

Posted
Posted

sevan: yes, the gt-r conversion is MONSTROUSLY costly, while the body parts themselves may not be overly so, the cost of fitting and spraying it is likely to double the cost of the parts, since the gt-r conversion covers almost all of the car.

I think its estimated at around 6k or so? you could do alot with 6k mate

Jonno34 Mentor

Jonno34

Posted
Posted

those are also really expensive, imo if you want a body kit just get something nice that was made for a gt-t, and if you want put a bonnet made for a gt-r on, and a mole to give the front that more round and aggressive look

sevan34 Collaborator

sevan34

Posted
  • Author
Posted

thanks for the help guys really appreciate it, this is my plan i wana buy the rear fenders and the rear impul rear bumper and get my side skirts modified to fit iv alrerady got monster sized wheels at 18 X 10.5 volk wheels and 38 mm rear spacers so it sits flush with the rear guards im quoted for the parts at $650 including shipping from viva garage and the guys i know quoted me $2200 fitted and sprayed (good mates of mine) is there anything else i should worry about before doing so or am i set for the job ?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...