Jump to content
SAU Community

Recommended Posts

hii guys i was just wondering if anyone can help me im trying to convert my rear end with the gtr rear quarter panels and with the gtr rear bar which i will get from viva garage does anyone know if i can modify my nismo sideskirts to fit the rear panels and the front fenders or if i need to also get the gtr rear tailgate covers to ? i already have big wheels to fit on along with spacers ? anyone please help

Edited by sevan34

i dont know if the vivagarage ones are for the gtr conversion... i think they may not be but im not 100%

they change the look and make em wider but pretty sure not gtr

sevan: yes, the gt-r conversion is MONSTROUSLY costly, while the body parts themselves may not be overly so, the cost of fitting and spraying it is likely to double the cost of the parts, since the gt-r conversion covers almost all of the car.

I think its estimated at around 6k or so? you could do alot with 6k mate

those are also really expensive, imo if you want a body kit just get something nice that was made for a gt-t, and if you want put a bonnet made for a gt-r on, and a mole to give the front that more round and aggressive look

thanks for the help guys really appreciate it, this is my plan i wana buy the rear fenders and the rear impul rear bumper and get my side skirts modified to fit iv alrerady got monster sized wheels at 18 X 10.5 volk wheels and 38 mm rear spacers so it sits flush with the rear guards im quoted for the parts at $650 including shipping from viva garage and the guys i know quoted me $2200 fitted and sprayed (good mates of mine) is there anything else i should worry about before doing so or am i set for the job ?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...