Jump to content
SAU Community

Recommended Posts

Go for it and goodluck.

I think it's a bit unfair people saying, don't do that you could make your car way faster etc, as mentioned everyone has their own preferences when comes to modifying cars. I've personally just finished doing a complete gtr lookalike conversion on my gtt, (spraying this week) and I'm really happy with the results. Things to be wary of, or mention to guys doing, petrol flap is a mare, will need a new hinge setup in it, or get a factory gtr flap, and cutout hinging point to match a factory gtr before you fit over fenders. (the gtt body has the template marked on it) I didn't know/do this and made life a bit trickier. Possible look for gtr rear tail light covers to match your gaurds, or build you factory gtt ones out to suit. (what I did not hard and ya get a perfect match) If you're using the fibreglass rear quarters, your factory skirts will match in if you trim the height behind the door, the fibreglass gaurds stop close to factory gtt skirt height. Also the fibreglass gaurds are actually 20 odd mm wider than factory gtr, definately a more aggressive stance, but if you trying to make an exact replica, not the same. And unfortunately, an estimate at 6k, would be pretty generous. I've done all the work myself, made all my own molds and gtr parts, (if you want any I can make GTR factory side skirts, rear bumper, fromt bumper, nismo skirts, z tune front splitter, nismo rear pods, and the rear overfender) And all on the car and primed I was roughly around 4K. That was tubbing rear gaurds, materials, and paying to borrow and repaint factory Items. If you put labour ontop, bill will add up quickly. If it's something you want you definately be happy with the results.

F*ck. Sorry for the triple post.

LOL, I get an error message almost every time I attempted to add a post. Unfortunately, GTRs are rare and the ones that are legal are stupid expensive in the states. I found a nice R34 GTT in New York that I'll convert into a GTR

Go for it and goodluck.

I think it's a bit unfair people saying, don't do that you could make your car way faster etc, as mentioned everyone has their own preferences when comes to modifying cars. I've personally just finished doing a complete gtr lookalike conversion on my gtt, (spraying this week) and I'm really happy with the results. Things to be wary of, or mention to guys doing, petrol flap is a mare, will need a new hinge setup in it, or get a factory gtr flap, and cutout hinging point to match a factory gtr before you fit over fenders. (the gtt body has the template marked on it) I didn't know/do this and made life a bit trickier. Possible look for gtr rear tail light covers to match your gaurds, or build you factory gtt ones out to suit. (what I did not hard and ya get a perfect match) If you're using the fibreglass rear quarters, your factory skirts will match in if you trim the height behind the door, the fibreglass gaurds stop close to factory gtt skirt height. Also the fibreglass gaurds are actually 20 odd mm wider than factory gtr, definately a more aggressive stance, but if you trying to make an exact replica, not the same. And unfortunately, an estimate at 6k, would be pretty generous. I've done all the work myself, made all my own molds and gtr parts, (if you want any I can make GTR factory side skirts, rear bumper, fromt bumper, nismo skirts, z tune front splitter, nismo rear pods, and the rear overfender) And all on the car and primed I was roughly around 4K. That was tubbing rear gaurds, materials, and paying to borrow and repaint factory Items. If you put labour ontop, bill will add up quickly. If it's something you want you definately be happy with the results.

I'm looking to convert my *FUTURE* GTT to a Z-tune. Hope you can help.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...