Jump to content
SAU Community

Recommended Posts

For sale is my new unused rb26/30 built this for my daily but lost my licence so no longer need it located in Hobart Tasmania but can send anywhere in Australia cheaply

Rb30 vl block

Chemically cleaned

Resprayed black

Tapped for gtr head studs

Decked

Bored 40 thou

Torque plate honed

Rb26 head reconditioned completely by Lewis race engines sydney

Acl steel head gasket

Tomei metal intake gaskets

Complete rb26 plenum and throttles

Arp head bolts

Hastings chromolly piston rings

New oversized pistons

H beam conrods

Arp conrod bolts

Acl bearings

Balanced crank

Jun crank cooler

Crank grub screwed

Rb25 oil pump

New front and rear main seals

Gates timing belt

Chemically cleaned rb26 cam cover set with speedflow fittings fitted to the creatures

Cost over $6000 to build after $4000 Ono need a fast sale to fund my main project please email [email protected]

Link to comment
https://www.sau.com.au/forums/topic/376137-fs-rb-2630/
Share on other sites

It was for a vl commodore to replace the rb30et and if I separate the head $1500 it cost $1800 - $2000 plus postage from Lewis engines from memory pm me numbers and i ring people that are interested must be sold in the next couple of days

Link to comment
https://www.sau.com.au/forums/topic/376137-fs-rb-2630/#findComment-5999815
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...