Jump to content
SAU Community

Recommended Posts

Vic, Frankston area.

Superspark Coil packs, suit RB25det S2 (not S1)

$250

90f209f2-1.jpg

image-1.jpg

RB25 Exedy Sports Tough clutch (new friction plates an be had from Andy at good prices here http://www.kudosmoto...late-p-595.html)

$50 inc flywheel

RB25 stock pressure plate

$50 inc flywheel

DSC_1022.jpg

R33 GTST LHS Door, KR4 colour. With glass and wing mirror. Paint in good cond, some clear coming off in one spot.

$300

Have the same thing in QM1 white, prefect condition.

$380

11092011424.jpg

R33 GTST RHS Door, KR4 colour. With glass and wing mirror. Paint in good cond.

$380

11092011416.jpg

R33 GTST S2. LHS guard, light damage.

$40

11092011425.jpg

11092011426.jpg

R33 GTST. Skuff plates, both sides.

$35

11092011413.jpg

11092011414.jpg

R33 GTST S2. ABS unit. Have two.

$75

11092011427.jpg

R33 GTST. Front hubs and up rights. Have 4.

$135ea

11092011422.jpg

11092011423.jpg

R33 GTST dash surround. (anything else you want, pm me)

$35

11092011406.jpg

Turbosmart boost 't

$35

11092011412.jpg

Ash try, have 2.

$25

11092011411.jpg

R33 GTST upper arms, have LHS and RHS

$50ea

01112011562.jpg

R33 Castor rod. Have 2.

$80ea

Have complete sets of rear arms x2

affbdfe9.jpg

2 rear subframes

Standard QM1 rear bar

$150

QM1 S2 Bonnet, some chips

$180

KR4 S2 Bonnet, very good

$250

QM1 S1 bonnet, good

$200

R33 Indicators, stock. have 3 sets.

$30

24102011525.jpg

HKS SSQV BOV, was on an RB.

$45

24102011524.jpg

Have rear glass and quarter glass.

Link to comment
https://www.sau.com.au/forums/topic/376843-r33-parting/
Share on other sites

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

Yep sure is.

$50

R33 Rear A1RM. $30 shipped.

01112011568.jpg

TRW front and rear pads, R33 GTST, $50 shipped.

01112011567.jpg

01112011566.jpg

Non HICAS boss, $35.

01112011564.jpg

jjr turn flow cooler piping, $30

R33 RB25 cooler to intake pipe, $35

R33 RB25 90deg bends, $15ea

01112011561.jpg

R33 GTST, stock rear suspension tops, $10

01112011559.jpg

R33 GTST, fuel pump braket. Have 2. $35ea.

01112011558.jpg

R33 GTST, stock intake pipe. $45

01112011557.jpg

R33 GTST, stock turbo to cooler piping. $35

01112011556.jpg

R33 GTST pipe, $35

R33 GTST BOV stock, $30

01112011555.jpg

R33 GTST RB25 AFM with KN Pod, $135

01112011554.jpg

R33 sub box, with amp and speakers. $150

01112011551.jpg

01112011550.jpg

Link to comment
https://www.sau.com.au/forums/topic/376843-r33-parting/#findComment-6010993
Share on other sites

hi mate interested in complete manual conversion if you have all of it or most, im tyring to get rid of my auto.

cheers. let me know how much for all of it, (box/clutch/crossmember/tailshaft/pedal etc etc)

Link to comment
https://www.sau.com.au/forums/topic/376843-r33-parting/#findComment-6024571
Share on other sites

Not the guards, i was asking about the gauges below the headunit. PM me.

lol, must have been tired.

they are stepper motor auto gauge

hi mate interested in complete manual conversion if you have all of it or most, im tyring to get rid of my auto.

cheers. let me know how much for all of it, (box/clutch/crossmember/tailshaft/pedal etc etc)

have all the gear, though the box has a broken selector and would need to be repair ~$600, but the price will reflect that.

Link to comment
https://www.sau.com.au/forums/topic/376843-r33-parting/#findComment-6025672
Share on other sites

Does it have an intercooler? if so what piping, chasing the cold side piping that goes over the radiator.

I have justjap return flow piping, both cold and hot side. But not the through the chassis over the radiator pipework.

is the bonnet for sale?

The CF bonnet is destroyed, have 1x KR4 silver S2 bonnet, 1x QM1 White S2 bonnet, 1x QM1 white S1 bonnet

Bud still got the clutch for sale? If so I'll come pick up this Friday or Saturday, at a time that suits you!

pm'd

Link to comment
https://www.sau.com.au/forums/topic/376843-r33-parting/#findComment-6026516
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So the original radiator is leaking now. Looking at getting a fully aluminium one next. Am I correct in saying that the Series 2 Auto Stageas have a separate trans cooler from factory (located in between the rad and intercooler in my previous post/message).   Currently looking at Fenix $460, Blitz $700, GReddy $800, and KoyoRad $740. What are everyones thought on Fenix ( ive read a few comments saying theyre cheap Chinese rebrands etc and how their build quality is... well.. chinese...)  compared to the others? Worth the extra couple hundies?
    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
×
×
  • Create New...