Jump to content
SAU Community

Lots Of R33 Parts & Other Bits

Chris Shaw
 Share

Recommended Posts

Chris Shaw Collaborator

Chris Shaw

Posted
Posted

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/377710-lots-of-r33-parts-other-bits/
Share on other sites
mikeyR33-T Collaborator

mikeyR33-T

Posted
Posted

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Hey mate, pity your not in SA, I would love a new front seat, mine has a rip and some stains... but id assume courier would cost just as much as the seat itself..

mikeyR33-T Collaborator

mikeyR33-T

Posted
Posted

I could find out some prices for you? Although the seat in my photo with the wearing is the drivers side. :(

Oh okay, mines worse exposing the metal bit, thanks anyways ill keep looking and let ya know :)

Chris Shaw Collaborator

Chris Shaw

Posted
  • Author
Posted

Photos of the headlights here:

http://imageshack.us/photo/my-images/38/img20110920204309.jpg/

http://imageshack.us/photo/my-images/13/img20110920204321.jpg/

http://imageshack.us/photo/my-images/13/img20110920204413.jpg/

Chris Shaw Collaborator

Chris Shaw

Posted
  • Author
Posted

Here is a photo of the ECU and loom that I have. Actual photo taken by me, no idea what car it's off. Please help me out. :P

http://imageshack.us/photo/my-images/192/img20110923003628.jpg/

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...