Help Please Guys

[Juz]

Stupid Question.. I own an R33GTS

It doesn't have Side skirts or Rear Pods.. How would I Go About installing these?... Tech Screws etc? This car didn't come from factory with side skirts... Its all one peice.

[buzz350]

best bet is to find some genuine plastic skirts and pods unless you like a certain aftermarket look, make sure they are painted the same colour as the car, to attach the skirt i would suggest using a trolley jack under the diff to lift the rear wheels off the ground and take the rear wheels off for access the the inner arch, and turn the front wheels to full lock so u have access again to the inner arch.

i would suggest drilling 1/8th holes first b4 using screws in the arches, use tech screws underneath or drill holes and repeat underneath. where it sits against the guard and quarter use sikaflex 260 i think it is from memory, and run a small bead 1cm down from the edge and not to high, and that is how i would/have done to affix the skirt.

with the pod the same deal, 1/8th hole in the arch and screw in and sikaflex 260 the rest of it as the same b4, use masking tape (2inch wide) to hold it onto the panel and wait 8 hours for the sikaflex to dry. and you should be set, use prepsol (wax and grease remover) to get rid of any excess sikaflex b4 it goes hard.

hope this helps too make your car look the way you want it.

aaron