Jump to content
SAU Community

Recommended Posts

Golgo did a 12.9 with slipping clutch (single plate) in 1st and 2nd. Oh... and Sam was driving. My best time is a 13.0.

Ran 190awkw on Sunday - but was not going for high power - just wanted some fire :)

mas_04_04_100b.jpg

The car has an exhaust, pods and PFC - so pretty stock. Plus Leewah makes everything look underpowered. Nigel (Ice Perf) noted recently that the crank-angle sensor is way off tune (from before I owned the car). A set of cam-gears, a new clutch and a 'from scratch' tune should see some higher figures.

Not that I really care - still goes pretty darn quick when I need it too :)

Thanks for your concern though.

Oh - and Golgo is a guy, not a girl :D

Yeah - I was told I had cam gears (even have a reciept for them) yet had not had a chance (until very recently) to pull the cover off and take a peek. Seems that the dealer or previous owner may have removed them and not set the CAS up properly. Has more top-end than it should though.

AF ratio is OK - but O2 sensors are f*cked and as such the car has fuel economy on par with an ocean-liner.

Also - the dyno was set to run up to 200km/h - and my car peaks in 4th around 230/240km/h. But... no excuses to be made, the car simply is not as powerful as some other GTRs, and was never intended to be. It is driven and enjoyed every day, washed at least once a week - and makes a fabulous cruiser. All the while looking pretty pimp and blowing some nice flames :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...