Jump to content
SAU Community

Recommended Posts

Hi guys unfortunatley with a bub almost due i have regrettably decided to part with my skyline,

History:

Got it back in feb for 3500 with this on it

Specs on the motor

FULLY Rebuilt by Phil Collier himself, at Collier engines in Adelaide all the info on the car is still on his computer.

Forged pistons, standard size (forgot brand ROSS i think?)

ACL race series bearings

450cc injectors

nisstune computer

adjustable fuel reg

front mount cooler

multi layered steel head gasket

decked block

full balance

bored out throttle body

turbo cam

3 inch mandrel bend turbo back exhaust with high flow cat, custom dump all 3 inch

lightened fly wheel

external waste gate

garret to4e top mount turbo

ported head, 3 angle valve job

When i got it the gearbox was faaaarked and clutch almost non existant, few thigs causing the car to run bad too

What ive done so far

http://www.skylinesaustralia.com/forums/topic/368262-mungys-r31-time-attack-build/

new gearbox, a 300rwkw clutch from KB clutch engineering, many many little fixes under the bonnet

all thats left to do is get a z32 AFM and a tune, possibly new dizzy (cause it has a little bug there that pisses me off or u can just deal with it lol) once the z32 is done this thing will make 300rwkw without breakin a sweat, VERY strong motor z32 will cost 200 second hand and a dyno tune from fours n more was quoted 450 including wiring up z32

has fresh 3 months rego

motor done less than 15,000 km from rebuild, over 300k on the chassi

bub is due in 3 weeks so need to sell ASAP paid 3500 for the car then spent near 2000 fixing it up, still abit ov work to be done before its mint

looking for quick sale of 3500 NOT A PENNY LESS

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/
Share on other sites

PRICE DROPPED TILL THIS WED TO 3000

145 views and no one interested? jeez to build a motor like this would cost near 6000 plus all the time and extra bits ive spent on it. let me know if its too high guys

buying car on wed this week if someone comes to grab it ill let it go for 3000 otherwise ill put it back to 3500 :thumbsup:

Edited by mungy
Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6032266
Share on other sites

Im very interested

need to talk to a mate that will be sharing the cost so may get back to you soon.

Would like to know what else (aside from what is listed) is needed to get the car running.

Edited by Stormchaser
Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6032556
Share on other sites

The car runs and is registered,

has fresh 3 months rego

you just cant get full power down, its still f**king fast and i cant imagine how scary this thing will be at full power.

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6033124
Share on other sites

engineered?

If it was engineered it would be closer to a 8k asking price

but in saying that i drove this thing most days and nights, it looks quite standard from outside....untill you put your foot down

Edited by mungy
Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6033239
Share on other sites

free bump

Just read 4 pages of your build thread, shame you have to sell it

maybe a baby pram at the back?

lol thats what the new car is for, this one currently has stripped interior ready to get rid of sound deadning and easier to get fresh wiring in the car

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6038415
Share on other sites

Hey mate, im looking at getting a 31 soon for light track drift & a streeter. Was wondering for noob like myself & being new to nissan's what a z32 is & without this can it still drive for the moment? ALso without a tune can it drive. Im in sydney so & im really considering this as it is very cheap & seems to have a strong motor setup. Thanks mate

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6048548
Share on other sites

Hey mate, im looking at getting a 31 soon for light track drift & a streeter. Was wondering for noob like myself & being new to nissan's what a z32 is & without this can it still drive for the moment? ALso without a tune can it drive. Im in sydney so & im really considering this as it is very cheap & seems to have a strong motor setup. Thanks mate

yes yes and yes EVERYONE PLEASE PAY ATTENTION , eeerrrhemm the car is perfectly drivable and you can still blow commonwhores away at the lights if u want,

you just cant get full power down because of the standard AFM

A z32 is the air flow meter and you can get one from any parts store brand new for 300 or off any forum second hand for like 150-200 with a plug then you would need to retune it with the new z32 attached

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6048899
Share on other sites

Ok sweet. Can you send me some recent pics as it stands now of exterior, interior & engine bay? My email is [email protected] I will have to book a flight or some sort of transport to SA from sydney so i dont think i could grab it before this weekend. Would you still be looking for $2500 some time next week if i can get down there?

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6049202
Share on other sites

Ok sweet. Can you send me some recent pics as it stands now of exterior, interior & engine bay? My email is [email protected] I will have to book a flight or some sort of transport to SA from sydney so i dont think i could grab it before this weekend. Would you still be looking for $2500 some time next week if i can get down there?

Nah mate i wont need the money at all after this weekend and it will sit at 3500 for the rest of its life after this weekend and it looks exactly the same as it does in my build thread, ready to have tar removed from interior ive got someone coming to look at it on saturday if she wont sell then, i will send thru some new pics to ur email

Link to comment
https://www.sau.com.au/forums/topic/378049-forged-r31/#findComment-6049423
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...