Jump to content
SAU Community

Recommended Posts

Hey guys....

OK well this question i know will definately make me sound like the biggest noob when it comes to cars lol but it is just something ive been thinking about for so long,

Im planning on buying an NA r33, Supra or DC2r. Im just curious is it possible at all to loose traction and for the rear end to start kicking out in either the r33 or supra at 60 kms + on a turn shaped like a half C

i understand if flooring it in first gear on a 90 degree angle this is most definately going to happen but have never been sure about this typical scenario.

Any feedback will be appreciated guys thanks, Anthony

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/
Share on other sites

Seriously stupid thing to ask lol. (why would you want/ need to know)

It depends what gear you are in, your tyres, if its raining etc. When I got my latest car (5 speed EF XR6), It came with real crap tyres, and if its raining and I put more then half throttle in any gear under 4, itll kick out.

When you say half-C , do you mean the C, or literally half of it? If youre going 60 and your in like 2nd or 3rd and your tyres are shit and the roads a bit wet then yeah you will loose traction in the rear, MAYBE if its dry.

Out of all of those cars get the Honda, shits all over the other two. NA R33's are slow as all hell, most/all NA Supras are bashed out shitters.

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6036488
Share on other sites

i never got tired of drifting my NA R33 in the wet.

It loved it, it needed it, it was insolent if i didnt.

In the dry, yeah first gear eaily enough with WOT n some decent turn, second if you were really being mean to it and just crying out for a defect... 3rd? ahhhh, no, in a nutshell....

I also hear that some R33 N/A's came without a limited slip diff. If thats the case, avoid like the plague as it will surely hamper the drifiting efforts. Not at all hektic.

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6036527
Share on other sites

No they will lose traction but Grip and not follow through like a Turbo....If this car is going to be your daily don't bother, get a cheap thrasher like every smart guy out their who want to Drift and light up the trye's somewhere legal.

Edited by starwarz
Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6036615
Share on other sites

lol ofcourse you can slide a NA. I wouldn't go a r33 or a supra if you want to slide though... get an NA s chassis.. stiff springs, welded diff and have fun sliding.. more skillz in drifting an NA... definitely possibly to break traction in either of those cars though.. just gotta know how to do it.

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6036649
Share on other sites

I can't remember her name, but there's some girl from Australia who was invited to Japan to drift her in NA Silvia in some event.

My Supra can drift alright, I'd need a better clutch to get those 60+km turns as you need to clutch kick it quite a lot. I'd agree with getting some sort of NA Silvia though, the Supra can handle a single drift okay, but when you try and link it up the weight transfer just kicks your ass.

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6037237
Share on other sites

lol im not concerned about drifting guys i was just curious if i was accelerating through a turn like that if the rear end would kick out if i wasnt trying to? thats my worry? lol

the answer is both yes and no. if you are paying attention and using a bit of throttle control then you will be fine, and if the back was to start to let go you would feel it starting to lose traction before you were out of control. if you just turn hard into the corner with your foot burried into the carpet then it may let go (but more likely you would understeer more than oversteer in that example). the same goes for if you were to just floor it mid corner.

moral of the story, drive like a dick and bad things will happen. drive sensibly and you will be fine.

Link to comment
https://www.sau.com.au/forums/topic/378561-na-drifting/#findComment-6038116
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...