Jump to content
SAU Community

Recommended Posts

hi i have a few parts lying around after i sold my gtt and would like to sell them.

first item is the neo engine cover which was removed

im after 50 bucks for it

contition is good ill put sum pics up in a few days.

second item is a carbon fibre airbox that i bought from just jap

i paid 250 for this and looking for 200. this is brand new and never fitted to the vehicle.

this is taken from the just jap website

- Carbon Fibre

- 1 Piece

- High Gloss Finish

- Shields Pod Filter

- Suit Factory Air Flow Meter

Vehicle Compatibility:

- Nissan Skyline R32 GTS-T (RB20DET)

- Nissan Skyline R33 GTS-T (RB25DET)

- Nissan Skyline R34 GTT (RB25DET)

Details

SKU SB42-15C

Quantity in stock 13 item(s) available

Price: AUD 249.00

Quantity Price post-41301-0-58280000-1317640122_thumb.jpg

third item is a set of gram light 8 rims. front are 17x7.5 and the rears are 17x8.5

they are white in colour and have few slight gutter rub. i pulled these of the car as i put 18s on there car

am looking for 500 for the set

due to me not always being on here if anyone is interested you can get hold of me on my mobile which is 0409 309 892 or email at [email protected]

parts are located in bathurst nsw

thanks again

Link to comment
https://www.sau.com.au/forums/topic/379013-r34-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...