Jump to content
SAU Community

Recommended Posts

my car is practically sitting on the ground. on has about 2 inches of clearance and its totally undriveable here in canada. the springs have been cut and i took the specs to my local auto store here and the couldnt confidently find a replacement.

does anyone know what springs options i have. i dont want to go original ride height so something with shorter than stock.

also what shock options, i found monroe, kyb and gab shocks a while back but lost the links to the specs. can anyone provide me with links please

finally what are my upgrade options, i know h31 are a bolt on fit for the front but what about the rear? any other modern nissan suspension that would fit with minimal work?

thanks

Link to comment
https://www.sau.com.au/forums/topic/379244-shocks-and-springs-help/
Share on other sites

S13 rear coilovers fit

Either drill body to 2 bolt or get tops changed to 3 bolt and ur in.

I have a full S13 coilover setup in my car now

Edited by Socrates

They have Pedders in the states its a little closer, i can have a look tomorrow for spring part numbers if you would like? that's if you retain your standard shocks.. r31 is live axle in most non import cases so unlikely to fit in the rear, plus its still macpherson strut in the front so no real upgrade at all.

other wise yeah s13 stuff can be made to fit but it needs to be coilovers as the standard s13 coil will contact the body

here is a conversion to s13 on a r30 if it helps

http://japanesenostalgiccar.com/forum/viewtopic.php?f=7&t=15070

scroll down

ps if you have the money to spend its worth every cent

Marc

ok so it looks like S13 coilovers for the rear are the way to go just the small task of making an adapter.

but what about the front? in this thread the guy made s13's fit the front but this was with some fab work

http://retrorides.proboards.com/index.cgi?board=readersrides&action=display&thread=86708&page=1

any way to get s13 coilovers to fit by modifying with off the shelf parts? anyone had first hand experience with this?

S13 rear coilovers fit

Either drill body to 2 bolt or get tops changed to 3 bolt and ur in.

I have a full S13 coilover setup in my car now

1. dont drill! just change the tops :-)

2. how did you do the fronts??? im still waiting on slack mates to take shit to fabrication for me. fml lol

yeah i got drums at the rear so guess im stuck with them for the time being. getting close to making a decision now, talking to my local fab guy he said he can have some custom s13 arms up front made to make the coilovers fit and fab up the adapters for the rear, price plus install around $600.

now trying to make a decision on coilovers i think the best ones are the Apexi exv N1 coilovers for the s13. spring rates are 6 and 8kg, anyone got a car with this kind of spring rate, hows stiff is the ride? i'm want it mainly for.a daily driver.

The 280zx conversion works an absolute treat. I have the entire 280zx rear end in my C210 - including disk brake conversion and rear sway bar.

Avoid the Pedders Red rear lowering springs. I have them in my car and they are way too low. The car sits on the bump stops and half the rear wheel is hidden up under the guard somewhere. Pedders Red front springs are about spot on though.

yeah i got drums at the rear so guess im stuck with them for the time being. getting close to making a decision now, talking to my local fab guy he said he can have some custom s13 arms up front made to make the coilovers fit and fab up the adapters for the rear, price plus install around $600.

now trying to make a decision on coilovers i think the best ones are the Apexi exv N1 coilovers for the s13. spring rates are 6 and 8kg, anyone got a car with this kind of spring rate, hows stiff is the ride? i'm want it mainly for.a daily driver.

for the rear: you can just take the datsun tops off the standard shock and replace them with the s13 ones.

coilovers are gunna be stiff. that's just the way it is. i use coilovers in my daily driver and i dont mind it. it's up to how much you can tolerate lol.

Remember due to S13 suspension setup, you make the front LCA to suit the Hub not the coilover, as the coilover doesn't connect to the LCA.

That's one of 2 ways u can do it, or you weld the bottom of the coilover the spindle hub.

What Silent Shadow i think is trying to say is, use the standard rear strut tops and put them on the coilover. In my experience this did not work with my HSD coilovers.

I run 8 & 6kg spring rates in my car, and coming from standard springs, yes it is harsher but is a huge upgrade on cornering.

yup that is what i meant cheers. in my experience, that did work with my HSD coilovers lol.

another thing you could try is see if R32 rear tops fit. that would be a lot neater and probably better quality too.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...