Jump to content
SAU Community

Recommended Posts

hi guys, time to get rid of my baby, to make room for a bigger family(more kids) so im buying a stagea.

the car is currently being fixed as the auto geabox is slipping. this is a regretful sale and i really wish i could have finished this car off, but family comes 1st. It was a street/strip project which is about 3/4 to where i wanted it to be, the aim was a 10 sec street car.

mods are a follows

exterior

s2 stout type R carbon fibre bonnet which are pretty rare

interior

autometer cobalt boost guage ustom fitted in dash

apexi turbo timer

pioneer double din head unit

blue/red LED dash kit

colour matched dash insert

genuine nissan floor mats

aftermarket 3 way speakers in the front doors... clarion i think

2x pioneer 10 inch subs in box

some ebay amp - the stereo is pretty good, but i really wanst worried, more stereo weighs the car down, the subs arent in the car atm but can be refitted easily.

suspension and handling

Cusco front struct brace

Cusco rear strut brace

HKS hypermax II coilovers all round - bound/rebound/height adjustable

tie rod ends have recently been done.

17" r34 GTT rims - 225/45 on the front 90% tread - 235/45 on the back 50% tread

engine and drivetrain

PowerFC ecu

z32 afm

700cc injectors

splitfire coilpacks

XRacing bar and plate FMIC 3" in and out near new

custom 2.5" pipework

all silicon and t-clamp connections

3" exhaust, the front pipe is compltetely custom made cost $500, and is 304 grade stainless, the middle pipe is from my old hks super dragger exhaust and is 3" mild steel, with a 3" stainless rear pipe, only a cat, resonator and 1 muffler.

44mm external gate 17psi spring, plumbed back in the exhaust. 1000kms old

XSPower stainless highmount, hpc coated. near new only 1000kms old

KAMAK T67-25G turbo with .82 rear, 1000kms old

XTR turbo beanie

Blitz suspower pod filter

oil catch can

relocated power steering resivour

re4r01a automatic gearbox - currently being rebuilt by bayswater automatics, the gearbox will be built using KEAS parts, fully manualised, billet servos, widened carbon band, extra clutches in the 3/4 clutch drum, hi temp bearings, fixed oil journals for higher flow, new gaskets, its a full reco + upgrades, heaps of work being done, 3.5k worth, the gearbox is guarnteed to handle 700rwhp.

http://www.keas.com.au

TCE 8" pro drag series torque converter - brand new being custom made to suit the gearbox. 3000 histall 1.5k worth of converter

PWR oil cooler.

currently the car has made 255rwkw @ 17psi on bp98 with a slipping clutch in the gearbox, which is why im rebuilding it. i really wanted to put the car into the 10's but it needs to go. massive potential, the turbo setup is proven to 500rwhp. it was tuned by trent @ chequered tuning(status tuning). the pipe work has since been changed, and bov removed as it was leaky, the car also developed an exhaust leak on the dyno. with a little more time and money, this car could make an easy 300rwkw,the engine is healthy as its always been properly tuned, and not thrashed.

downsides to the car - the body is a little rough, couple of dents in the roof from the ppl that did the exhaust - didnt latch the bonnet, it flipped up and hit the roof, i havent had time to get it fixed, theres a couple of other small dings, and scratches, and the rear bar could use some paint, although i can paint it if its going to make the sale, i have the paint from when i did the front end which u can see is pretty good in the pics.

heres a couple of pics for now and ill get some more tomorrow.

CEG1CgBmkKGrHqYOKjgE0dTfBV5BNS7il8pQw_3.jpg

CEGTSg2kKGrHqYOKp0E0VKo5JQ9BNS7e2Zy_3.jpg

during the build, this is the old pipework setup

SAM_0521.jpg

cheers guys

hunting around $14500 neg give me a decent offer i will consdier it.

still rego'd. but no RWC with the purchase

PLATES NOT FOR SALE WITH CAR!!!!!

im in victoria in west gippsland, i will post when viewing is available and the car is done.

can sms offers to me @ 0408678744

Edited by OMY31T
Link to comment
https://www.sau.com.au/forums/topic/379826-1995-r33-gtst-qiknlo/
Share on other sites

got a few more photos of it and a short video of it running. in the video theres some weird echos, i can assure you its not the engine, its running perfectly. i gave it a bit of a rev even though its cold to show that its blowing no smoke at all and the turbo/engine is in good nic. the engine sounds a bit tinny comapred to normal and it makes the engine sound a bit tappy, like the lifters are noisy, i can also assure that they are not, only the normal amount of noise mainly from injector and spark pulses.

IMAG0132.jpg

IMAG0134.jpg

IMAG0135.jpgsd

IMAG0136.jpg

IMAG0138.jpg

this is the damage to the roof from the bonnet flipping up.

IMAG0140.jpg

IMAG0141.jpg

and a short video

p.s theres a couple of others videos, some are during the build and before it was tuned and another with the old GT30 setup. none of these are with the rebuilt gearbox

Edited by OMY31T

i may consider selling the car with the box as is for around $11000. to repair the box back to stock which will handle around 300-350rwkw including a reco torque converter, i was quoted $2500, or around the same price to do a manual conversion including all parts.

make me an offer. car goes in on the 26th for the box rebuild(waiting for torque converter to be made by tce.)

the car still drives ok in 1st and second gear, its just the 3/4 clutch drum slips. if you want to put in another auto, your looking at about $300 to buy one, but the gearbox in the car has already had about 3.5k worth of work done, has a stage 2 KEAS shift kit in it(semi automatic).

a change of plans has made me able to drop the price of the car. im just trying to cover the cost of my other car, and i can now drop the car down to $9500ono as is. i need it gone, pm me, sms me, make me an offer. the gearbox is a pain in the ass, but the car has had well ove 15k worth of mods done. throw in a manual, get it retuned, easy 300rwkw car.

look up the other builds with this setup. search "kando dynamics".

forgot to mention the car has a 2 month old battery, oil change, oil filter, fuel filter,new fuel pump sock,cooling system flushed and new plugs less than 1000km's ago

the car can be looked at this weekend, i will be home, but no tyre kickers, serious buyers only.

call me on the mobile number above or text me to arrange a time.

Edited by OMY31T
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...