Jump to content
SAU Community

Recommended Posts

Hey guys,

I recently crashed my R30 sedan and messed up the front right suspension pretty bad

Snapped the tension rod, and severly bent the transverse link and the stabilizer bar.

The 2 front guards are a bit buckled too

What are my options for replacement? I'm in Tas where it's going to be near impossible to find r30 parts locally, willing to pay freight

What r31/s13 parts can be fitted? I'm not looking to spend a great deal on the car just yet but if it's an easy job to do then i might look at changing the whole assembly

Cheers

Where in Tas are you located? Im grow up Hobart area, moved to mainland about 8 years ago

Member on here 'chinna' is up Launceston way, Im pretty sure he MAY be able to help you

Can you provide pics of damage?

By far the cheapest option is to find a wreck and buy that for spare parts.

Otherwise, actual individual parts like guards are getting very hard to find.

Stock parts for replacement will be easiest and no experimenting or dodgying up required!

If you have smished up your front headlights, I will send you a set and all you pay is postage. (from Canberra 2600 to your loc.)

R31 Swaybar will fit, need to fiddle with the x-member mounts a bit and you'll be fine. There are a few dattos (liek 1600, and Stanza etc) that have very similar front end geometry, so you may be able to get a tension rod/castor bar from one of them.... bit of messing about finding it though!

Thanks for the help dude, and the offer!

Headlights are fine though.

I'm in Hobart but a drive anywhere in the state isn't really an issue.

How much modification is involved with fitting S13 suspension?

It's going to be a bitch just to find another r30 in the near future

post-88478-0-73241200-1318760053_thumb.jpg

post-88478-0-80934700-1318760109_thumb.jpg

post-88478-0-71793700-1318760180_thumb.jpg

post-88478-0-87133000-1318760290_thumb.jpg

spewing, i got castor arms, lcas and a couiple of gaurds, swy bar braket i got sumwhere.

but im in sydney happy to post

Cheers dude. I'll take all that if i can't find it locally within a month or so!

wouldn't cost more than $50 to post in the one box would it?

a whiteline sway bar is on ebay at the moment for $250 posted. Worth it? Probably not

$250 for the whiteline is crap.... get a R31 item, its already a few mm biger than the stock R30 swaybar. Normally can be had from wreckers for $20 or so.

I had a big plastic tub of parts sent from Bris to Canb, cost $48, was about 19kg too.

e-go freight or something.....

sweet man, i carnt c postage being more than $25.00. (not including guards)

$250 4 whitleline sway bar is a rip! i got both mine front and rear 4 that much!

they doo come with new sway bar brackets and bushs thou...

btw if u want stewart wilkins does sweeet adj castor arms if u wanna head down that route

hey mate i live in lonnie

i have and old front cut sitting around no panels but alll the suspension stuff u need

let me know if ur coming up we can sort some thing out. I am not asking top dollar just tell me what u wanna pay and we can go from there

cheers

i will send you some pics as it has been sitting for a while make sure u happy with the con

price is make me an offer as its been sitting for a while and its just a spare parts car

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...