Jump to content
SAU Community

Recommended Posts

Going to brief here..

Km's: 85 ***

Colour: Honey gold

Location: Sydney

Price $15 000

Contact: 0404 513 631 (serious buyers only!!!) don't answer forum email very often..

Some of the mods include:

Fresh respray in honey gold nissan factory colour & not one ding! Door jam inside & out job, Just needs front bar to be painted as i changed the bar back to factory

Clean interior with recaro(some wear), gear knob, wheel & boost gauge.

BC coilovers

Brand new slotted all round disks, pads & fluid

New nismo turbos!!

New studs everywhere, turbo/dump/manifold gaskets/fuel filter/oil filter/oil etc...

New JJR stainless front pipe

K & N intake kit

Splitfire coilpacks & sparkplugs

P45 18 x 10 new wheels with new federals all round - 265 rear/235 front.

Calsonic front mount cooler

750cc denso injectors

Bosch 040 pump

Motor was rebuilt 10 000kms ago

Full exhaust

Hicas lock bar

Turbosmart boost tee

& more...

All the car needs is a tune & for the injectors & new pump to be put in. Also the front diffs seal is worn so i just drained the fluid out and it is in rwd mode - this is a cheap fix just a $20 seal or so... have no money anymore due to uni :(

Fully engineered just needs rego

This is shit cheap considering i bought it for more than this and have spent nearly 10 grand

post-38103-0-68642200-1319010615_thumb.jpg

post-38103-0-41798300-1319010642_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/
Share on other sites

Also the front diffs seal is worn so i just drained the fluid out and it is in rwd mode - this is a cheap fix just a $20 seal or so... have no money anymore due to uni :(

Your joking arent you..... you do realise you will stuff the diff driving it with no oil in it!

Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/#findComment-6069261
Share on other sites

Then thankfully your not working on my car!!!

You do realise that the front drive shafts will still turn the diff over and the bearings in that diff need oil to lubricate them regardless of if they have drive from the engine or not..... in order to stop the diff turning over you need to remove the front drive shafts and you cant remove the front drive shafts to stop it from turning as the wheel bearings will come apart....

get some oil in it and live with the leak or you will seize the diff

Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/#findComment-6069437
Share on other sites

Ummm mate i'm not like some nub i have done heaps of trackdays set up with my own work.. I have not driven the car since there has been no oil in it. note that it has just had turbo's redone, fuel etc... I have pushed the car around and driven it once up into my driveway before i did all of these mods so i believe they would be fine. I let it drain out so i don't put a few litres of oil on my garage everyday from the leak lol, hence why i said it must be fixed, there is still a few hundred ml's in there. Thanks anyways but :)

Edited by tyr33
Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/#findComment-6069456
Share on other sites

Should have said that in the first place then as that changes the whole thing.... fair call on not wanting to unload the diff oil on the floor, but as i have said, simply pulling the fuse does not mean that the front diff needs no oil. Which you seem to think is the case.....

Just some friendly advice thats all mate. I have built more of these things than i care to think about and would prefer to say something than see someone seize a diff

Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/#findComment-6069461
Share on other sites

So have a swap lined up for a weeks time roughly but there is another car i really want which still allows me to pay off debt, true story...

$11 800 !!! This week only as if not i'll be going ahead with this swap, Crazy cheap for a gtr in this cond! No damage, solid motor...

Call 0404 513 631

Link to comment
https://www.sau.com.au/forums/topic/380646-1989-r32-gtr/#findComment-6086633
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...