Jump to content
SAU Community

Recommended Posts

Hello there I have a complete front and rear BREMBO brake set COMPLETE with rotors calipers brake lines and pads . They are coming of a car I imported and is arriving next week with 22,000kms they are in pristine condition , reason for the sale is I have already bought upgraded BREMBOS for the car so I'm out to sell the original brakes of the car

$2500 for the complete set . Brakes are in Sydney prefer pickup but can freight

Call bill 0412351418

Please note I also have a complete set of BREMBOS front and rear of a EVO 8 2003 , came of car with only 12,000kms in pristine cond ,selling due to AP brake upgrade,

Comes with rotors front 328mm rear320mm 4spot front calipers and 2 spot rear . Any enquiries please call me . $2000

  • 4 weeks later...
  • 7 months later...

Both sets of Brembos are now available for delivery or pickup from Sydney

They are in immaculate cond and came of NISMO S1

Brakes rotors and brake lines

  • 3 weeks later...

Added is a r33/34 skyline seat rail to suit sparco /race seat ,used as a trial fit and then sold the car

Retails for $280 sell for $100

The r34 gtr Brembo brakes are of a genuine NISMO S1 and are in mint cond - must be sold

  • 2 months later...

What's the size for the rotors? I've had trouble trying to replace mine but I'm interested n if u hav pics it will be better too :] thank you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...