Jump to content
SAU Community

Recommended Posts

Hi folks,

I've got a few items up for sale. I'm located Sydney, Inner West. My contact number is 0412 509 637. PM me or give me a call. Cheers!

1. R32 GTR rims with Yokohama A048R semi slicks

- 5x114.3 pcd, 16*8+30. Great fit on S13, R32 Gts-t. Obviously fits other skylines also.

- 3 rims are in very good condition (keeping in mind they're 20 years old). One has gutter rash - see pics below.

- all rims have centre caps

- Tyres are Yokohama A048R semi slicks. MH compound. They're 225/50/R16's. They've seen 4 track days, still tons of tread left.

$600

DSC_0007-1.jpg

DSC_0005-1.jpg

DSC_0004-1.jpg

DSC_0003-1.jpg

DSC_0002-1.jpg

2. Sabelt 4pt harness in good nick. Has everything you need to bolt straight in.

$100

DSC_0008-1.jpg

3. No name wing with bootlid reinforcement underneath (see pics).

- Creates less lift, looks like you're going fast. Seriously though, it did improve stability through faster corners imo. Take the wing and bootlid for $100

DSC_0017.jpg

DSC_0019.jpg

DSC_0016-1.jpg

DSC_0010-1.jpg

4. Momo corse bucket seat.

- One piece fibreglass

- FIA approved

- Mounts for S13

- Has lumbar and thigh cushions

- Great seat, just has tears in the material. If you're doing skids or trackdays, a great upgrade over the standard seat, and very safe.

$200 or, buy the harness too and i'll give you both for $250

Photo0026.jpg

Photo0028.jpg

Photo0028.jpg

GTR rims sold.

I also have a bunch of S13 spares if people need them - rear glass, quarter glass, standard rear upper and toe arms, driver's side door, steering column (off the top of my head). If you're interested in any of that stuff, let me know and we can work something out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...