Jump to content
SAU Community

Recommended Posts

White Lancer Evolution 8MR.

Regretful sale, however I am looking to put a deposit down on an apartment soon as I am getting sick of paying rent.

Priorities. . .

50,00x Kms, have the import papers etc.

Paint is in excellent condition.

Rego till October 2012

Gets serviced every 6 months since I don’t do get to do 5,000kms.

Engine/Drivetrain

Standard Engine

Tomei front pipe

Tomei dump pipe

Standard evo 8MR turbo

HKS Kansai CF Airbox

Plazmaman Intercooler piping

HKS Legamax catback exhaust

Tomioka 100cell cat

Walbro Fuel pump

Stock clutch and flywheel

HKS EVC 6 boost controller

HKS Turbo timer

ARC low temp water thermostat

Brake/Suspension/Wheels

Standard Brembo Brakes

Brembo brake pads

DBA 4000 rotors

GReddy Type-S coilovers with camber tops Front: 8.0K - Rear: 6.0K

3mm Slip over Hubcentric Spacers to clear brembos

18x9.5 +22mm AME TM-02 gunmetal grey wheels with AME centre caps

235/40/18 Falken azenis rt-615 with plenty of tread left

Exterior/Interior

EVO 9 Rear Bar

Genuine CF Voltex diffuser

Do Luck style carbon Front lip

CF Vortex Generator

Defi BF Amber (oil temp/water temp/boost) with defi controller

JVC doubled din touchscreen headunit

ARC gear knob

Ralliart pedals

Genuine Mitsubishi weather shields

PIAA windscreen wipers

Standard floor mats and seats in excellent condition

Steel Mate 2way alarm

Kill switch

1kg Fire extinguisher

Tuned via ECUflash on 98. Tuning done by Powertune

Power - 210kw~ ATW @ 1.6bar.

Looking for 38,000ono or more than willing to remove parts to lower the price.

Car located in North Strathfield.

Contact via PM or SMS me on 0416751515

Cheers

Dave

Link to comment
https://www.sau.com.au/forums/topic/381412-nsw-white-lancer-evolution-8mr/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...